Estimated number of persons by quarter of a year and by year, Canada, provinces and territories.

This Alberta Official Statistic provides the distribution of Alberta’s population within the 8 economic regions of Alberta for 2011. Alberta is divided into eight economic regions as follows: Lethbridge – Medicine -Hat; Camrose-Drumheller; Calgary; Banff – Jasper – Rocky Mountain House; Red Deer; Edmonton; Athabasca – Grande Prairie – Peace River; and Wood Buffalo – Cold Lake. The economic regions of Calgary and Edmonton account for the largest proportion (69.0%) of Alberta’s population. The remaining six economic regions each accounted for less than 10% of the population.

Income of individuals by age group, sex and income source, Canada, provinces and selected census metropolitan areas, annual.

This figure provides the age-standardized mortality rates per 100,000 population, for the three selected causes of death and all causes combined for both the local geographic area and Alberta for the most recent three-year period available. The three selected causes of death are Circulatory System, Neoplasms and External Causes (Injury). Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. The figure is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022

Between 2001 and 2006, Canada’s population grew by 5.4%. Only two provinces, Alberta and Ontario and three territories registered growth rates above the national average. The three Maritime provinces (Prince Edward Island, Nova Scotia and New Brunswick) had the smallest population growth, while Newfoundland and Labrador and Saskatchewan experienced population declines. In 2006, about 21.5 million people, almost two-thirds of Canada’s population lived in 33 census metropolitan areas (CMAs). Between 2001 and 2006, the population of these CMAs climbed 6.9%, faster that the national average. Barrie registered the fastest population growth of any CMA (19.2%), followed by Calgary (13.4%), Oshawa (11.6%) and Edmonton (10.4%).

Figure 7.1 provides the age-standardized mortality rates per 100,000 population, for the three selected causes of death and all causes combined. The three selected causes of death are Circulatory System, Neoplasms and External Causes (Injury). Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022

With 3.0 Million Businesses in Canada , Techsalerator has access to the highest B2B count of Data/Business Data in the country. .

Thanks to our unique tools and large data specialist team, we are able to select the ideal targeted dataset based on the unique elements such as sales volume of a company, the company's location, no. of employees etc...

Whether you are looking for an entire fill install, access to our API's or if you are just looking for a one-time targeted purchase, get in touch with our company and we will fulfill your international data need.

We cover all regions and cities in Canada. Here is an example:

Regions :

The Atlantic Region - Newfoundland and Labrador, Prince Edward Island, Nova Scotia, New Brunswick. Central Canada - Quebec, Ontario. The Prairie Provinces - Manitoba, Saskatchewan, Alberta. The West Coast - British Columbia. The North - Nunavut, Northwest Territories, Yukon Territory.

Province : Alberta British Columbia Manitoba New Brunswick Newfoundland and Labrador Northwest Territories Nova Scotia Nunavut Ontario Prince Edward Island Quebec Saskatchewan Yukon

City : Province Population Toronto Ontario Montréal Quebec Vancouver British Columbia Ottawa Ontario Edmonton Alberta Calgary Alberta Quebéc Quebec Winnipeg Manitoba Hamilton Ontario London Ontario Kitchener Ontario St Catharines-Niagara Ontario Halifax Nova Scotia Victoria British Columbia Windsor Ontario Oshawa Ontario Saskatoon Saskatchewan Regina Saskatchewan St John's Newfoundland Sudbury Ontario Chicoutimi Quebec Sherbrooke Quebec Kingston Ontario Trois-Rivières Quebec Kelowna British Columbia Abbotsford British Columbia Saint John New Brunswick Thunder Bay Ontario Barrie Ontario Sydney Nova Scotia

This table provides the age-standardized inpatient separation rates per 100,000 population for selected conditions for most recent fiscal year. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. The selected conditions are Asthma, Diabetes, Influenza, Ischemic Heart Diseases, Mental and Behavioural Disorders due to Psychoactive Substance Use, Pneumonia, Pulmonary Heart and Pulmonary Circulation Diseases. Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published February 2013.

This table provides the age-standardized mortality rates per 100,000 population, for the three selected causes of death and all causes combined. The three selected causes of death are Circulatory System, Neoplasms and External Causes (Injury). Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published March 2019

Number and rate (per 100,000 population) of homicide victims, Canada and Census Metropolitan Areas, 1981 to 2024.

Low income cut-offs (LICOs) before and after tax by community size and family size, in current dollars, annual.

This table presents income shares, thresholds, tax shares, and total counts of individual Canadian tax filers, with a focus on high income individuals (95% income threshold, 99% threshold, etc.). Income thresholds are geography-specific; for example, the number of Nova Scotians in the top 1% will be calculated as the number of taxfiling Nova Scotians whose total income exceeded the 99% income threshold of Nova Scotian tax filers. Different definitions of income are available in the table namely market, total, and after-tax income, both with and without capital gains.

Figure 9.2 provides the age-standardized inpatient separation rates per 100,000 population for selected conditions for most recent fiscal year. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. The selected conditions are Asthma, Diabetes, Influenza, Ischemic Heart Diseases, Mental and Behavioural Disorders due to Psychoactive Substance Use, Pneumonia, Pulmonary Heart and Pulmonary Circulation Diseases. Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This figure is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022.

This figure provides the age-standardized inpatient separation rates per 100,000 population for selected conditions for most recent fiscal year. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. The selected conditions are Asthma, Diabetes, Influenza, Ischemic Heart Diseases, Mental and Behavioural Disorders due to Psychoactive Substance Use, Pneumonia, Pulmonary Heart and Pulmonary Circulation Diseases. Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published March 2019.

This table provides inpatient separation rates per 1,000 population for patients residing in the local geographic area and Alberta accessing health facilities across all of Alberta. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022.

This table provides statistics on Family Composition, Family Income, Housing Mobility, Language, Immigration, Educational Attainment, Household and Dwelling Characteristics for selected indicators. This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. The Federal Census (2016) and National Household Survey (2016) information is custom extracted by Statistics Canada at the local geographic area level. The population of these areas varies from very small in rural areas to large in metropolitan centers. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022.

This table provides inpatient separation rates per 1,000 population for patients residing in the local geographic area and Alberta accessing health facilities across all of Alberta. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022.

This table provides the age-standardized inpatient separation rates per 100,000 population for selected conditions for most recent fiscal year. An inpatient separation from a health care facility occurs anytime a patient (or resident) leaves because of death, discharge, sign-out against medical advice or transfer. The number of separations is the most commonly used measure of the utilization of hospital services. Separations, rather than admissions, are used because hospital abstracts for inpatient care are based on information gathered at the time of discharge. The selected conditions are Asthma, Diabetes, Influenza, Ischemic Heart Diseases, Mental and Behavioural Disorders due to Psychoactive Substance Use, Pneumonia, Pulmonary Heart and Pulmonary Circulation Diseases. Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer, Calgary West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published February 2013.

(StatCan Product) Customization details: This information product has been customized to present information on the employed by industries (NAICS 2007 – 1, 2, 3 and 4 digits) for Canada, provinces and the Alberta Census Metropolitan Areas (CMA) of Edmonton and Calgary – Annual Averages from 2001 to 2012 (in thousands). For more information about the industries and sectors presented, contactOSI.Support@gov.ab.ca Labour Force Survey The Canadian Labour Force Survey was developed following the Second World War to satisfy a need for reliable and timely data on the labour market. Information was urgently required on the massive labour market changes involved in the transition from a war to a peace-time economy. The main objective of the LFS is to divide the working-age population into three mutually exclusive classifications - employed, unemployed, and not in the labour force - and to provide descriptive and explanatory data on each of these. Target population The LFS covers the civilian, non-institutionalized population 15 years of age and over. It is conducted nationwide, in both the provinces and the territories. Excluded from the survey's coverage are: persons living on reserves and other Aboriginal settlements in the provinces; full-time members of the Canadian Armed Forces and the institutionalized population. These groups together represent an exclusion of less than 2% of the Canadian population aged 15 and over. National Labour Force Survey estimates are derived using the results of the LFS in the provinces. Territorial LFS results are not included in the national estimates, but are published separately. Documentation – Labour Force Survey Instrument design The current LFS questionnaire was introduced in 1997. At that time, significant changes were made to the questionnaire in order to address existing data gaps, improve data quality and make more use of the power of Computer Assisted Interviewing (CAI). The changes incorporated included the addition of many new questions. For example, questions were added to collect information about wage rates, union status, job permanency and workplace size for the main job of currently employed employees. Other additions included new questions to collect information about hirings and separations, and expanded response category lists that split existing codes into more detailed categories. Sampling This is a sample survey with a cross-sectional design. Data sources Responding to this survey is mandatory. Data are collected directly from survey respondents. Data collection for the LFS is carried out each month during the week following the LFS reference week. The reference week is normally the week containing the 15th day of the month. LFS interviews are conducted by telephone by interviewers working out of a regional office CATI (Computer Assisted Telephone Interviews) site or by personal visit from a field interviewer. Since 2004, dwellings new to the sample in urban areas are contacted by telephone if the telephone number is available from administrative files, otherwise the dwelling is contacted by a field interviewer. The interviewer first obtains socio-demographic information for each household member and then obtains labour force information for all members aged 15 and over who are not members of the regular armed forces. The majority of subsequent interviews are conducted by telephone. In subsequent monthly interviews the interviewer confirms the socio-demographic information collected in the first month and collects the labour force information for the current month. Persons aged 70 and over are not asked the labour force questions in subsequent interviews, but rather their labour force information is carried over from their first interview. In each dwelling, information about all household members is usually obtained from one knowledgeable household member. Such 'proxy' reporting, which accounts for approximately 65% of the information collected, is used to avoid the high cost and extended time requirements that would be involved in repeat visits or calls necessary to obtain information directly from each respondent. Error detection The LFS CAI questionnaire incorporates many features that serve to maximize the quality of the data collected. There are many edits built into the CAI questionnaire to compare the entered data against unusual values, as well as to check for logical inconsistencies. Whenever an edit fails, the interviewer is prompted to correct the information (with the help of the respondent when necessary). For most edit failures the interviewer has the ability to override the edit failure if they cannot resolve the apparent discrepancy. As well, for most questions the interviewer has the ability to enter a response of Don't Know or Refused if the respondent does not answer the question. Once the data is received back at head office an extensive series of processing steps is undertaken to thoroughly verify each record received. This includes the coding of industry and occupation information and the review of interviewer entered notes. The editing and imputation phases of processing involve the identification of logically inconsistent or missing information items, and the correction of such conditions. Since the true value of each entry on the questionnaire is not known, the identification of errors can be done only through recognition of obvious inconsistencies (for example, a 15 year-old respondent who is recorded as having last worked in 1940). Estimation The final step in the processing of LFS data is the assignment of a weight to each individual record. This process involves several steps. Each record has an initial weight that corresponds to the inverse of the probability of selection. Adjustments are made to this weight to account for non-response that cannot be handled through imputation. In the final weighting step all of the record weights are adjusted so that the aggregate totals will match with independently derived population estimates for various age-sex groups by province and major sub-provincial areas. One feature of the LFS weighting process is that all individuals within a dwelling are assigned the same weight. In January 2000, the LFS introduced a new estimation method called Regression Composite Estimation. This new method was used to re-base all historical LFS data. It is described in the research paper ""Improvements to the Labour Force Survey (LFS)"", Catalogue no. 71F0031X. Additional improvements are introduced over time; they are described in different issues of the same publication. Data accuracy Since the LFS is a sample survey, all LFS estimates are subject to both sampling error and non-sampling errors. Non-sampling errors can arise at any stage of the collection and processing of the survey data. These include coverage errors, non-response errors, response errors, interviewer errors, coding errors and other types of processing errors. Non-response to the LFS tends to average about 10% of eligible households. Interviews are instructed to make all reasonable attempts to obtain LFS interviews with members of eligible households. Each month, after all attempts to obtain interviews have been made, a small number of non-responding households remain. For households non-responding to the LFS, a weight adjustment is applied to account for non-responding households. Sampling errors associated with survey estimates are measured using coefficients of variation for LFS estimates as a function of the size of the estimate and the geographic area.