This data set includes cities in the United States, Puerto Rico and the U.S. Virgin Islands. These cities were collected from the 1970 National Atlas of the United States. Where applicable, U.S. Census Bureau codes for named populated places were associated with each name to allow additional information to be attached. The Geographic Names Information System (GNIS) was also used as a source for additional information. This is a revised version of the December, 2003, data set.

This layer is sourced from maps.bts.dot.gov.

A dataset listing Washington cities by population for 2024.

A dataset listing New York cities by population for 2024.

Unadjusted decennial census data from 1950-2000 and projected figures from 2010-2040: summary table of New York City population numbers and percentage share by Borough, including school-age (5 to 17), 65 and Over, and total population.

A dataset listing Virginia cities by population for 2024.

A dataset listing Oregon cities by population for 2024.

A dataset listing Indiana cities by population for 2024.

A dataset listing Georgia cities by population for 2024.

A dataset listing Wisconsin cities by population for 2024.

A dataset listing Louisiana cities by population for 2024.

The urban–rural continuum classifies the global population, allocating rural populations around differently-sized cities. The classification is based on four dimensions: population distribution, population density, urban center location, and travel time to urban centers, all of which can be mapped globally and consistently and then aggregated as administrative unit statistics.Using spatial data, we matched all rural locations to their urban center of reference based on the time needed to reach these urban centers. A hierarchy of urban centers by population size (largest to smallest) is used to determine which center is the point of “reference” for a given rural location: proximity to a larger center “dominates” over a smaller one in the same travel time category. This was done for 7 urban categories and then aggregated, for presentation purposes, into “large cities” (over 1 million people), “intermediate cities” (250,000 –1 million), and “small cities and towns” (20,000–250,000).Finally, to reflect the diversity of population density across the urban–rural continuum, we distinguished between high-density rural areas with over 1,500 inhabitants per km2 and lower density areas. Unlike traditional functional area approaches, our approach does not define urban catchment areas by using thresholds, such as proportion of people commuting; instead, these emerge endogenously from our urban hierarchy and by calculating the shortest travel time.Urban-Rural Catchment Areas (URCA).tif is a raster dataset of the 30 urban–rural continuum categories for the urban–rural continuum showing the catchment areas around cities and towns of different sizes. Each rural pixel is assigned to one defined travel time category: less than one hour, one to two hours, and two to three hours travel time to one of seven urban agglomeration sizes. The agglomerations range from large cities with i) populations greater than 5 million and ii) between 1 to 5 million; intermediate cities with iii) 500,000 to 1 million and iv) 250,000 to 500,000 inhabitants; small cities with populations v) between 100,000 and 250,000 and vi) between 50,000 and 100,000; and vii) towns of between 20,000 and 50,000 people. The remaining pixels that are more than 3 hours away from any urban agglomeration of at least 20,000 people are considered as either hinterland or dispersed towns being that they are not gravitating around any urban agglomeration. The raster also allows for visualizing a simplified continuum created by grouping the seven urban agglomerations into 4 categories.Urban-Rural Catchment Areas (URCA).tif is in GeoTIFF format, band interleaved with LZW compression, suitable for use in Geographic Information Systems and statistical packages. The data type is byte, with pixel values ranging from 1 to 30. The no data value is 128. It has a spatial resolution of 30 arc seconds, which is approximately 1km at the equator. The spatial reference system (projection) is EPSG:4326 - WGS84 - Geographic Coordinate System (lat/long). The geographic extent is 83.6N - 60S / 180E - 180W. The same tif file is also available as an ESRI ArcMap MapPackage Urban-Rural Catchment Areas.mpkFurther details are in the ReadMe_data_description.docx

U.S. Census Populated Place Areas represents the 2020 U.S. Census populated place areas of the United States that include incorporated places, cities, and census designated places identified by the U.S. Census Bureau.This layer is updated annually. The geography is sourced from U.S. Census Bureau 2020 TIGER FGDB (National Sub-State) and edited using TIGER Hydrography to add a detailed coastline for cartographic purposes. Attribute fields include 2020 total population from the U.S. Census Public Law 94 data. The Population Class field values represent population ranges as follows:Population from 0 - 249Population from 250 - 499Population from 500 - 999Population from 1,000 - 2,499Population from 2,500 - 9,999Population from 10,000 - 49,999Population from 50,000 - 99,999Population from 100,000 - 249,999Population from 250,000 - 499,999Population 500,000 and overThis ready-to-use layer can be used in ArcGIS Pro and in ArcGIS Online and its configurable apps, dashboards, StoryMaps, custom apps, and mobile apps. The data can also be exported for offline workflows. Cite the 'U.S. Census Bureau' when using this data.

A dataset listing Colorado cities by population for 2024.

This data layer produced by the National Center for Education Statistics’ (NCES) Education Demographic and Geographic Estimates (EDGE) program provides a geographic locale framework that classifies all U.S. territory into twelve categories ranging from Large Cities to Remote Rural areas. NCES uses this framework to describe the type of geographic area where schools and school districts are located. The criteria for these classifications are defined by NCES, but they rely on standard geographic areas developed and maintained by the U.S. Census Bureau. The 2020 NCES Locale boundaries are based on geographic areas represented in Census TIGER/Line 2020. The NCES Education Demographic and Geographic Estimate (EDGE) program collaborates with the U.S. Census Bureau’s Education Demographic, Geographic, and Economic Statistics (EDGE) Branch to annually update the locale boundaries. For more information about the NCES locale framework, see: https://nces.ed.gov/programs/edge/Geographic/LocaleBoundaries. The classifications include: City - Large (11): Territory inside an Urbanized Area and inside a Principal City with population of 250,000 or more. City - Midsize (12): Territory inside an Urbanized Area and inside a Principal City with population less than 250,000 and greater than or equal to 100,000. City - Small (13): Territory inside an Urbanized Area and inside a Principal City with population less than 100,000. Suburb – Large (21): Territory outside a Principal City and inside an Urbanized Area with population of 250,000 or more. Suburb - Midsize (22): Territory outside a Principal City and inside an Urbanized Area with population less than 250,000 and greater than or equal to 100,000. Suburb - Small (23): Territory outside a Principal City and inside an Urbanized Area with population less than 100,000. Town - Fringe (31): Territory inside an Urban Cluster that is less than or equal to 10 miles from an Urbanized Area. Town - Distant (32): Territory inside an Urban Cluster that is more than 10 miles and less than or equal to 35 miles from an Urbanized Area. Town - Remote (33): Territory inside an Urban Cluster that is more than 35 miles of an Urbanized Area. Rural - Fringe (41): Census-defined rural territory that is less than or equal to 5 miles from an Urbanized Area, as well as rural territory that is less than or equal to 2.5 miles from an Urban Cluster. Rural - Distant (42): Census-defined rural territory that is more than 5 miles but less than or equal to 25 miles from an Urbanized Area, as well as rural territory that is more than 2.5 miles but less than or equal to 10 miles from an Urban Cluster. Rural - Remote (43): Census-defined rural territory that is more than 25 miles from an Urbanized Area and is also more than 10 miles from an Urban Cluster.All information contained in this file is in the public domain. Data users are advised to review NCES program documentation and feature class metadata to understand the limitations and appropriate use of these data.

Analysis of ‘Locales 2019’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://catalog.data.gov/dataset/26ac55dc-dcbd-467f-995f-319e789dd198 on 12 February 2022.

--- Dataset description provided by original source is as follows ---

--- Original source retains full ownership of the source dataset ---

This dataset includes all fetal deaths for a given year and includes all items released in the public-use file. Additional information in this file includes state and county of residence (cities with a population of 250,000 or greater) and exact date of delivery (which includes day of month, month, and year).

The Global Urban-Rural Catchment Areas (URCA) is a raster dataset of the 30 urban-rural continuum categories of catchment areas for cities and towns. Each rural pixel is assigned to one defined travel time category: less than one hour, one to two hours, and two to three hours travel time to one of seven urban agglomeration sizes. The agglomerations range from large cities with i) populations greater than 5 million and ii) between 1 to 5 million; intermediate cities with iii) 500,000 to 1 million and iv) 250,000 to 500,000 inhabitants; small cities with populations v) between 100,000 and 250,000 and vi) between 50,000 and 100,000; and vii) towns of between 20,000 and 50,000 people. The remaining pixels that are more than 3 hours away from any urban agglomeration of at least 20,000 people are considered as either hinterland or dispersed towns being that they are not gravitating around any urban agglomeration.

Data publication: 2021-01-01

Contact points:

Metadata contact: Theresa McMenomy FAO-UN

Contact: Andrea Cattaneo FAO-UN

Contact: Theresa McMenomy FAO-UN

Data lineage:

The dataset is from https://doi/10.1073/pnas.2011990118 and http://dx.doi.org/10.6084/m9.figshare.12579572

Resource constraints:

CC By 4.0

Online resources:

Urban-rural continuum dataset download

urban_rural_catchment_areas.tif

This dataset provides labour market indicators aggregated at national level and broken down by territorial typology according to the population's access to cities.

Data source and definition

I>The indicators include labour indicators at place of residence by type of territory. Data is based on a labor force survey using ILO methodology and collected from Eurostat (reg_lmk) for EU countries and via delegates of the OECD Working Party on Territorial Indicators (WPTI), as well as from national statistical offices' websites.

The indicators are aggregated data at the national level, using the typology of small (TL3) regions to calculate totals or averages for all metropolitan large regions, metropolitan midsize regions, near a midsize/large FUA regions, near a small FUA regions and remote regions.

Territorial typology on the population's access to cities

Territorial typologies helps to assess differences in socio-economic trends in regions, both within and across countries and to highlight the specific issues faced by each type of region.

The OECD territorial typology on access to cities uses the concept of functional urban areas (FUA) – composed of urban centres and their commuting areas – and classifies small (TL3) regions (Fadic et al., 2019) according to the following criteria:

• Metropolitan regions, if more than half of the population live in a FUA. Metropolitan regions are further classified into: metropolitan large, if more than half of the population live in a (large) FUA of at least 1.5 million inhabitants; and metropolitan midsize, if more than half of the population live in a (midsize) FUA of at 250 000 to 1.5 million inhabitants.
• Non-metropolitan regions, if less than half of the population live in a midsize/large FUA. These regions are further classified according to their level of access to FUAs of different sizes: near a midsize/large FUA if more than half of the population live within a 60-minute drive from a midsize/large FUA (of more than 250 000 inhabitants) or if the TL3 region contains more than 80% of the area of a midsize/large FUA; near a small FUA if the region does not have access to a midsize/large FUA and at least half of its population have access to a small FUA (i.e. between 50 000 and 250 000 inhabitants) within a 60-minute drive, or contains 80% of the area of a small FUA; and remote, otherwise.

List of OECD regions and typologies are presented in the OECD Territorial correspondence table (xlsx). Maps of OECD regions are presented in the OECD Territorial grid (pdf).

Cite this dataset

OECD Regions and Cities databases http://oe.cd/geostats

Further information

• The interactive web-tool OECD Regions and Cities Statistical Atlas
• The report OECD Regions and Cities at a Glance

Contact: RegionStat@oecd.org

In response to the COVID-19 crisis, the Board's emergency lending facilities have provided a critical backstop. The Board launched a centralized 13(3) Lending Facilities Data Repository on November 6, 2020 to bring together the emergency lending facilities data from different systems and databases. The Federal Reserve established the Municipal Liquidity Facility to help state and local governments better manage cash flow pressures in order to continue to serve households and businesses in their communities. The facility will purchase up to $500 billion of short term notes directly from U.S. states (including the District of Columbia), U.S. counties with a population of at least 500,000 residents, and U.S. cities with a population of at least 250,000 residents. Eligible state-level issuers may use the proceeds to support additional counties and cities. In addition to the actions described above, the Federal Reserve will continue to closely monitor conditions in the primary and secondary markets for municipal securities and will evaluate whether additional measures are needed to support the flow of credit and liquidity to state and local governments. The Municipal Liquidity Facility ceased purchasing eligible notes on December 31, 2020.