This data set consists of a set of 136 ESRI formatted GRID data sets representing elevations in meters for the state of Arizona. Each file covers a half degree block and as a collection they cover the entire State of Arizona. The data were created by processing U.S.Geological Survey 30 meter Digital Elevation Model files for all of the 7.5 minute quadrangle map areas in Arizona. The processing produced ESRI formatted lattices (GRIDs) for each quadrangle. These were then merged into the half degree blocks.

By using this data, you agree to the SEMCOG Copyright License Agreement.

This document explains one process for downloading LiDAR and DEM data for Southeast Michigan form the United States Geological Survey (USGS). This data was flown in 2017 and 2018, and is identical to the data that SEMCOG distributes. Full metadata for the LiDAR and DEM data is available for download at a link included within the document.

This layer shows the elevation (in meters) for Kalimantan. 90 meter resolution. Data was prepared by the World Resources Institute for use in the Suitability Mapper (2012).

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps. The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country. The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada. Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project. The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

Click here to access the data directly from the Illinois State Geospatial Data Clearinghouse.This page from the Illinois Geospatial Data Clearinghouse includes download links for the following Lake County datasets specific to the 2017 LiDAR capture:BreaklinesLASTile IndexDerivativesMetadata

The National Geospatial-Intelligence Agency (NGA) and the National Science Foundation (NSF) partnered with the University of Minnesota and other members of the academic research community, private sector, and international partners to create this first-ever publicly available, high-resolution, satellite-based elevation data map of the Arctic. The 3-D digital elevation models, or DEMs, are the product of the ArcticDEM project, which was created after a January 2015 executive order calling for enhanced coordination of national efforts in the Arctic. This site hosts web maps, map viewers, other DEM exploratory tools, nautical charts, sailing directions and infographics, and a downloadable Pan-Arctic map with mission-specific data layers. ArcticDEM encompasses all land area north of 60° north latitude as well as all territory of Greenland, the State of Alaska in its entirety, and the Kamchatka Peninsula of the Russian Federation. This site supports the past U.S. Chair of the Arctic Council and the U.S. Presidential Executive Order on Enhancing Coordination of National Efforts in the Arctic

Digital Elevation Model from Lidar (2013-2021), with values in meters and feet. Image service published by MassGIS from ArcGIS Server.The DEM was created from Light Detection and Ranging (Lidar) terrain and elevation data that cover the entirety of Massachusetts. This DEM is based on the best available lidar data, as described at the Lidar Terrain Data page. The DEM is a 16-bit signed integer raster dataset and has a 0.5 meter pixel resolution.This image service is the source for the values appearing in the popup in the Massachusetts Elevation Finder application.

This web map leverages the KyFromAbove 5 foot Digital Elevation Model (DEM) ArcGIS Server Image Service and provides a 5K tiling grid with embedded links for downloading individual DEM tiles from Phase 1, Phase 2 and Phase3 collection periods. Each of the Phase1 DEM tiles are provided in an ERDAS Imagine (IMG) format and is zipped up with its associated metadata file in XML format. Phase2 and Phase3 DEM tiles are provided in a GeoTIFF format. The Phase1 data resource was derived from the ground class within KyFromAbove point cloud data and has a 5-foot point spacing. The Phase2 and Phase3 data was derived from the ground class within KyFromAbove point cloud data and has a 2-foot point spacing. DEM data specifications adopted by the KyFromAbove Technical Advisory Committee can be found here. More information regarding this data resource can be found on the KyFromAbove website.

This dynamic map service provides access to 5K data tiles for the Commonwealth of Kentucky. The Commonwealth manages its elevation data (DEM) holdings using this grid. Information regarding year acquired is included in the attributes.

DEM Bare Earth Tile Indexes for each LiDAR project. The “DIRECT_DL” field contains a hyperlink to download the associated IMG files. More information for existing DEM collections can be found at https://gis.ny.gov/nys-dem. Service last updated 9/5/25Feature and map services available:https://elevation.its.ny.gov/arcgis/rest/services/Dem_Indexes/FeatureServerhttps://elevation.its.ny.gov/arcgis/rest/services/Dem_Indexes/MapServer Please contact NYS ITS Geospatial Services at nysgis@its.ny.gov if you have any questions.

The U.S. Interagency Elevation Inventory (USIEI) displays high-accuracy topographic and bathymetric data for the United States and its territories. The project is a collaborative effort between the National Oceanic and Atmospheric Administration, the U.S. Geological Survey, the Federal Emergency Management Agency, the U.S. Department of Agriculture - Natural Resources Conservation Service and U.S. Forest Service, the National Park Service, and the U.S. Army Corps of Engineers. This resource is a comprehensive, nationwide listing of known high-accuracy topographic data, including lidar and IfSAR, and bathymetric data, including NOAA hydrographic surveys, multibeam data, and bathymetric lidar. This zip file contains the attribute information and footprints about the data sets that are displayed in the Topographic Lidar, Topobathy Shoreline Lidar, IfSAR Data, and Bathymetric Lidar layers in the USIEI viewer. This does not include the elevation data itself. The data are provided in Esri file geodatabase format (gdb) and in the open format of OGC GeoPackage (gpkg). The data is also available via this map service: https://coast.noaa.gov/arcgis/rest/services/USInteragencyElevationInventory/USIEIv2/MapServer. The data is updated quarterly. The information provided for each elevation data set includes many attributes such as vertical accuracy, point spacing, and date of collection. A direct link to access the data or information about the contact organization is also available through the inventory. The footprints in this data set are generalized to represent the coverage of the collection. If the exact data coverage is needed, please contact the data provider for an authoritative footprint. The fields in the gdb and gpkg are in four tables. The fields in each table are listed in the Entity Attribute Overview field.

The U.S. Geological Survey has developed a National Elevation Dataset (NED). The NED is a seamless mosaic of best-available elevation data. The 7.5-minute elevation data for the conterminous United States are the primary initial source data. In addition to the availability of complete 7.5-minute data, efficient processing methods were developed to filter production artifacts in the existing data, convert to the NAD83 datum, edge-match, and fill slivers of missing data at quadrangle seams. One of the effects of the NED processing steps is a much-improved base of elevation data for calculating slope and hydrologic derivatives. The specifications for the NED 1 arc second and 1/3 arc second data are: Geographic coordinate system Horizontal datum of NAD83, except for AK which is NAD27 Vertical datum of NAVD88, except for AK which is NAVD29 Z units of meters.Source data for this service are from the U.S. Geological Survey. These data were provided to the University of Idaho Library in November, 2004 by Mr. Tracy Fuller, USGS Idaho Mapping Liaison, Boise, Idaho.

This product set contains high-resolution Interferometric Synthetic Aperture Radar (IFSAR) imagery and geospatial data for the Barrow Peninsula (155.39 - 157.48 deg W, 70.86 - 71.47 deg N) and Barrow Triangle (156.13 - 157.08 deg W, 71.14 - 71.42 deg N), for use in Geographic Information Systems (GIS) and remote sensing software. The primary IFSAR data sets were acquired by Intermap Technologies from 27 to 29 July 2002, and consist of Orthorectified Radar Imagery (ORRI), a Digital Surface Model (DSM), and a Digital Terrain Model (DTM). Derived data layers include aspect, shaded relief, and slope-angle grids (floating-point binary and ArcInfo grid format), as well as a vector layer of contour lines (ESRI Shapefile format). Also available are accessory layers compiled from other sources: 1:250,000- and 1:63,360-scale USGS Digital Raster Graphic (DRG) mosaic images (GeoTIFF format); 1:250,000- and 1:63,360-scale USGS quadrangle index maps (ESRI Shapefile format); a quarter-quadrangle index map for the 26 IFSAR tiles (ESRI Shapefile format); and a simple polygon layer of the extent of the Barrow Peninsula (ESRI Shapefile format). Unmodified IFSAR data comprise 26 data tiles across UTM zones 4 and 5. The DSM and DTM tiles (5 m resolution) are provided in floating-point binary format with header and projection files. The ORRI tiles (1.25 m resolution) are available in GeoTIFF format. FGDC-compliant metadata for all data sets are provided in text, HTML, and XML formats, along with the Intermap License Agreement and product handbook. The baseline geospatial data support education, outreach, and multi-disciplinary research of environmental change in Barrow, which is an area of focused scientific interest. Data are provided on five DVDs, available through licensing only to National Science Foundation (NSF)-funded investigators. An NSF award number must be provided when ordering data.

Yearly effective energy and mass transfer (EEMT) (MJ m−2 yr−1) was calculated for the Valles Calders, upper part of the Jemez River basin by summing the 12 monthly values. Effective energy and mass flux varies seasonally, especially in the desert southwestern United States where contemporary climate includes a bimodal precipitation distribution that concentrates in winter (rain or snow depending on elevation) and summer monsoon periods. This seasonality of EEMT flux into the upper soil surface can be estimated by calculating EEMT on a monthly basis as constrained by solar radiation (Rs), temperature (T), precipitation (PPT), and the vapor pressure deficit (VPD): EEMT = f(Rs,T,PPT,VPD). Here we used a multiple linear regression model to calculate the monthly EEMT that accounts for VPD, PPT, and locally modified T across the terrain surface. These EEMT calculations were made using data from the PRISM Climate Group at Oregon State University (www.prismclimate.org). Climate data are provided at an 800-m spatial resolution for input precipitation and minimum and maximum temperature normals and at a 4000-m spatial resolution for dew-point temperature (Daly et al., 2002). The PRISM climate data, however, do not account for localized variation in EEMT that results from smaller spatial scale changes in slope and aspect as occurs within catchments. To address this issue, these data were then combined with 10-m digital elevation maps to compute the effects of local slope and aspect on incoming solar radiation and hence locally modified temperature (Yang et al., 2007). Monthly average dew-point temperatures were computed using 10 yr of monthly data (2000–2009) and converted to vapor pressure. Precipitation, temperature, and dew-point data were resampled on a 10-m grid using spline interpolation. Monthly solar radiation data (direct and diffuse) were computed using ArcGIS Solar Analyst extension (ESRI, Redlands, CA) and 10-m elevation data (USGS National Elevation Dataset [NED] 1/3 Arc-Second downloaded from the National Map Seamless Server at seamless.usgs.gov). Locally modified temperature was used to compute the saturated vapor pressure, and the local VPD was estimated as the difference between the saturated and actual vapor pressures. The regression model was derived using the ISOHYS climate data set comprised of approximately 30-yr average monthly means for more than 300 weather stations spanning all latitudes and longitudes (IAEA).

Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a regular array of elevations cast on a designated coordinate projection system. The DEM data are stored as a series of profiles in which the spacing of the elevations along and between each profile is in regular whole number intervals. The normal orientation of data is by columns and rows. Each column contains a series of elevations ordered from south to north with the order of the columns from west to east. The DEM is formatted as one ASCII header record (A- record), followed by a series of profile records (B- records) each of which include a short B-record header followed by a series of ASCII integer elevations per each profile. The last physical record of the DEM is an accuracy record (C-record).7.5-minute DEM (30- by 30-m data spacing, cast on Universal Transverse Mercator (UTM) projection). Provides coverage in 7.5- by 7.5-minute blocks. Each product provides the same coverage as a standard USGS 7.5-minute quadrangle without over edge.

The U.S. Geological Survey (USGS), in cooperation with the New Jersey Department of Environmental Protection (NJDEP), prepared hydro-conditioned geographic information systems (GIS) data layers for use in the updated New Jersey StreamStats 2022 application (U.S. Geological Survey, 2022). This update features improvements in base-elevation resolution from 10 meters to 10 feet and stream centerline hydrography from 1:24,000 to 1:2,400 scale. Hydro conditioning is the process of burning single-line stream centerlines at the 1:2,400 scale into a digital elevation model to produce flow direction and flow accumulation grids. This data release contains raster digital datasets for a 10-foot digital elevation model, a flow direction grid, and a flow accumulation grid for the updated New Jersey Streamstats 2022 application. The eleven 8-digit Hydrologic Unit Codes (HUCs) represented by this dataset are 02020007, 02030103, 02030104, 02030105, 02040104, 02040105, 02040201, 02040202, 02040206, 02040301, and 02040302 (U.S. Geological Survey, 2016). The updated New Jersey StreamStats 2022 application provides access to spatial analytical tools that are useful for water-resources planning and management, as well as engineering and design purposes. The map-based user interface can be used to delineate drainage areas, determine basin characteristics, and estimate flow statistics, including instantaneous flood discharge, monthly flow-duration, and monthly low-flow frequency statistics for ungaged streams. References cited: U.S. Geological Survey, 2016, National Hydrography: U.S. Geological Survey, accessed February 4, 2022, at https://www.usgs.gov/national-hydrography. U.S. Geological Survey, 2022, StreamStats v4.6.2: U.S. Geological Survey, accessed February 4, 2022, at https://streamstats.usgs.gov/ss/.

This is a collection of all GPS- and computer-generated geospatial data specific to the Alpine Treeline Warming Experiment (ATWE), located on Niwot Ridge, Colorado, USA. The experiment ran between 2008 and 2016, and consisted of three sites spread across an elevation gradient. Geospatial data for all three experimental sites and cone/seed collection locations are included in this package. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Geospatial files include cone collection, experimental site, seed trap, and other GPS location/terrain data. File types include ESRI shapefiles, ESRI grid files or Arc/Info binary grids, TIFFs (.tif), and keyhole markup language (.kml) files. Trimble-imported data include plain text files (.txt), Trimble COR (CorelDRAW) files, and Trimble SSF (Standard Storage Format) files. Microsoft Excel (.xlsx) and comma-separated values (.csv) files corresponding to the attribute tables of many files within this package are also included. A complete list of files can be found in this document in the “Data File Organization” section in the included Data User's Guide. Maps are also included in this data package for reference and use. These maps are separated into two categories, 2021 maps and legacy maps, which were made in 2010. Each 2021 map has one copy in portable network graphics (.png) format, and the other in .pdf format. All legacy maps are in .pdf format. .png image files can be opened with any compatible programs, such as Preview (Mac OS) and Photos (Windows). All GIS files were imported into geopackages (.gpkg) using QGIS, and double-checked for compatibility and data/attribute integrity using ESRI ArcGIS Pro. Note that files packaged within geopackages will open in ArcGIS Pro with “main.” preceding each file name, and an extra column named “geom” defining geometry type in the attribute table. The contents of each geospatial file remain intact, unless otherwise stated in “niwot_geospatial_data_list_07012021.pdf/.xlsx”. This list of files can be found as an .xlsx and a .pdf in this archive. As an open-source file format, files within gpkgs (TIFF, shapefiles, ESRI grid or “Arc/Info Binary”) can be read using both QGIS and ArcGIS Pro, and any other geospatial softwares. Text and .csv files can be read using TextEdit/Notepad/any simple text-editing software; .csv’s can also be opened using Microsoft Excel and R. .kml files can be opened using Google Maps or Google Earth, and Trimble files are most compatible with Trimble’s GPS Pathfinder Office software. .xlsx files can be opened using Microsoft Excel. PDFs can be opened using Adobe Acrobat Reader, and any other compatible programs. A selection of original shapefiles within this archive were generated using ArcMap with associated FGDC-standardized metadata (xml file format). We are including these original files because they contain metadata only accessible using ESRI programs at this time, and so that the relationship between shapefiles and xml files is maintained. Individual xml files can be opened (without a GIS-specific program) using TextEdit or Notepad. Since ESRI’s compatibility with FGDC metadata has changed since the generation of these files, many shapefiles will require upgrading to be compatible with ESRI’s latest versions of geospatial software. These details are also noted in the “niwot_geospatial_data_list_07012021” file.

This product set contains reduced-resolution Interferometric Synthetic Aperture Radar (IFSAR) imagery and geospatial data for the Barrow Peninsula (155.39 - 157.48 deg W, 70.86 - 71.47 deg N), for use in Geographic Information Systems (GIS) and remote sensing software. The primary IFSAR data sets were acquired by Intermap Technologies from 27 to 29 July 2002, and consist of an Orthorectified Radar Imagery (ORRI), a Digital Surface Model (DSM), and a Digital Terrain Model (DTM). Derived data layers include aspect, shaded relief, and slope-angle grids (floating-point binary format), as well as a vector layer of contour lines (ESRI Shapefile format). Also available are accessory layers compiled from other sources: 1:250,000- and 1:63,360-scale USGS Digital Raster Graphic (DRG) mosaic images (GeoTIFF format); 1:250,000- and 1:63,360-scale USGS quadrangle index maps (ESRI Shapefile format); and a simple polygon layer of the extent of the Barrow Peninsula (ESRI Shapefile format). The DSM and DTM data sets (20 m resolution) are provided in floating-point binary format with header and projection files. The ORRI mosaic (5 m resolution) is available in GeoTIFF format. FGDC-compliant metadata for all data sets are provided in text, HTML, and XML formats, along with the Intermap License Agreement and product handbook. The baseline geospatial data support education, outreach, and multi-disciplinary research of environmental change in Barrow, which is an area of focused scientific interest. Data are available via FTP and CD-ROM.

With this mapping application, users can click anywhere within the Commonwealth of Massachusetts to find the elevation at that location in both meters and feet. The elevation data digital elevation model (DEM), in integer units, are derived from statewide Lidar (2013-2021) Terrain Data. The Vertical Datum of the lidar data used to create the DEM is NAVD88 – Geoid18 (m).

The map displays a tile service that shows the DEM using a custom color ramp along with Lidar-derived shaded relief image. The symbology was created by MassGIS staff in ArcGIS Pro using the 'multiply' layer blending option. At medium and large scales the MassGIS Map Features for Imagery tile layer displays atop the imagery.Click the "i" button in the lower left to view a legend.This application is hosted by MassGIS at ArcGIS Online.

The terrain dataset and contours were created using aerial Lidar collected on March 25, 2022 at a density of greater than 12 points per square meter. Lidar points classified as ground were used as the basis of the terrain model. Breaklines were added around bridges, retaining walls, and other sharp features to improve the accuracy around sudden breaks in the terrain. Breaklines were also added along significant bodies of water to assist with hydro-enforcement. The final terrain dataset was used to generate 1-foot contours. RMSEz = 0.33 feet.