• The current US Census Bureau world population estimate in June 2019 shows that the current global population is 7,577,130,400 people on Earth, which far exceeds the world population of 7.2 billion in 2015. Our estimate based on UN data shows the world's population surpassing 7.7 billion.
• China is the most populous country in the world with a population exceeding 1.4 billion. It is one of just two countries with a population of more than 1 billion, with India being the second. As of 2018, India has a population of over 1.355 billion people, and its population growth is expected to continue through at least 2050. By the year 2030, India is expected to become the most populous country in the world. This is because India’s population will grow, while China is projected to see a loss in population.
• The following 11 countries that are the most populous in the world each have populations exceeding 100 million. These include the United States, Indonesia, Brazil, Pakistan, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, and the Philippines. Of these nations, all are expected to continue to grow except Russia and Japan, which will see their populations drop by 2030 before falling again significantly by 2050.
• Many other nations have populations of at least one million, while there are also countries that have just thousands. The smallest population in the world can be found in Vatican City, where only 801 people reside.
• In 2018, the world’s population growth rate was 1.12%. Every five years since the 1970s, the population growth rate has continued to fall. The world’s population is expected to continue to grow larger but at a much slower pace. By 2030, the population will exceed 8 billion. In 2040, this number will grow to more than 9 billion. In 2055, the number will rise to over 10 billion, and another billion people won’t be added until near the end of the century. The current annual population growth estimates from the United Nations are in the millions - estimating that over 80 million new lives are added yearly.
• This population growth will be significantly impacted by nine specific countries which are situated to contribute to the population growth more quickly than other nations. These nations include the Democratic Republic of the Congo, Ethiopia, India, Indonesia, Nigeria, Pakistan, Uganda, the United Republic of Tanzania, and the United States of America. Particularly of interest, India is on track to overtake China's position as the most populous country by 2030. Additionally, multiple nations within Africa are expected to double their populations before fertility rates begin to slow entirely.

Content

• In this Dataset, we have Historical Population data for every Country/Territory in the world by different parameters like Area Size of the Country/Territory, Name of the Continent, Name of the Capital, Density, Population Growth Rate, Ranking based on Population, World Population Percentage, etc. >Dataset Glossary (Column-Wise):
• Rank: Rank by Population.
• CCA3: 3 Digit Country/Territories Code.
• Country/Territories: Name of the Country/Territories.
• Capital: Name of the Capital.
• Continent: Name of the Continent.
• 2022 Population: Population of the Country/Territories in the year 2022.
• 2020 Population: Population of the Country/Territories in the year 2020.
• 2015 Population: Population of the Country/Territories in the year 2015.
• 2010 Population: Population of the Country/Territories in the year 2010.
• 2000 Population: Population of the Country/Territories in the year 2000.
• 1990 Population: Population of the Country/Territories in the year 1990.
• 1980 Population: Population of the Country/Territories in the year 1980.
• 1970 Population: Population of the Country/Territories in the year 1970.
• Area (km²): Area size of the Country/Territories in square kilometers.
• Density (per km²): Population Density per square kilometer.
• Growth Rate: Population Growth Rate by Country/Territories.
• World Population Percentage: The population percentage by each Country/Territories.

Series Name: Proportion of countries that have conducted at least one population and housing census in the last 10 years (percent)Series Code: SG_REG_CENSUSRelease Version: 2020.Q2.G.03 This dataset is the part of the Global SDG Indicator Database compiled through the UN System in preparation for the Secretary-General's annual report on Progress towards the Sustainable Development Goals.Indicator 17.19.2: Proportion of countries that (a) have conducted at least one population and housing census in the last 10 years; and (b) have achieved 100 per cent birth registration and 80 per cent death registrationTarget 17.19: By 2030, build on existing initiatives to develop measurements of progress on sustainable development that complement gross domestic product, and support statistical capacity-building in developing countriesGoal 17: Strengthen the means of implementation and revitalize the Global Partnership for Sustainable DevelopmentFor more information on the compilation methodology of this dataset, see https://unstats.un.org/sdgs/metadata/

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

Series Name: Proportion of countries with birth registration data that are at least 90 percent complete (percent)Series Code: SG_REG_BRTH90Release Version: 2020.Q2.G.03 This dataset is the part of the Global SDG Indicator Database compiled through the UN System in preparation for the Secretary-General's annual report on Progress towards the Sustainable Development Goals.Indicator 17.19.2: Proportion of countries that (a) have conducted at least one population and housing census in the last 10 years; and (b) have achieved 100 per cent birth registration and 80 per cent death registrationTarget 17.19: By 2030, build on existing initiatives to develop measurements of progress on sustainable development that complement gross domestic product, and support statistical capacity-building in developing countriesGoal 17: Strengthen the means of implementation and revitalize the Global Partnership for Sustainable DevelopmentFor more information on the compilation methodology of this dataset, see https://unstats.un.org/sdgs/metadata/

All cities with a population > 1000 or seats of adm div (ca 80.000)Sources and ContributionsSources : GeoNames is aggregating over hundred different data sources. Ambassadors : GeoNames Ambassadors help in many countries. Wiki : A wiki allows to view the data and quickly fix error and add missing places. Donations and Sponsoring : Costs for running GeoNames are covered by donations and sponsoring.Enrichment:add country name

Series Name: Proportion of countries with death registration data that are at least 75 percent complete (percent)Series Code: SG_REG_DETH75Release Version: 2020.Q2.G.03 This dataset is the part of the Global SDG Indicator Database compiled through the UN System in preparation for the Secretary-General's annual report on Progress towards the Sustainable Development Goals.Indicator 17.19.2: Proportion of countries that (a) have conducted at least one population and housing census in the last 10 years; and (b) have achieved 100 per cent birth registration and 80 per cent death registrationTarget 17.19: By 2030, build on existing initiatives to develop measurements of progress on sustainable development that complement gross domestic product, and support statistical capacity-building in developing countriesGoal 17: Strengthen the means of implementation and revitalize the Global Partnership for Sustainable DevelopmentFor more information on the compilation methodology of this dataset, see https://unstats.un.org/sdgs/metadata/

The Low Elevation Coastal Zone (LECZ) Urban-Rural Population and Land Area Estimates, Version 2 data set consists of country-level estimates of urban population, rural population, total population and land area country-wide and in LECZs for years 1990, 2000, 2010, and 2100. The LECZs were derived from Shuttle Radar Topography Mission (SRTM), 3 arc-second (~90m) data which were post processed by ISciences LLC to include only elevations less than 20m contiguous to coastlines; and to supplement SRTM data in northern and southern latitudes. The population and land area statistics presented herein are summarized at the low coastal elevations of less than or equal to 1m, 3m, 5m, 7m, 9m, 10m, 12m, and 20m. Additionally, estimates are provided for elevations greater than 20m, and nationally. The spatial coverage of this data set includes 202 of the 232 countries and statistical areas delineated in the Gridded Rural-Urban Mapping Project version 1 (GRUMPv1) data set. The 30 omitted areas were not included because they were landlocked, or otherwise lacked coastal features. This data set makes use of the population inputs of GRUMPv1 allocated at 3 arc-seconds to match the SRTM elevations, and at 30 arc-seconds resolution in order to reflect uncertainty levels in the product resulting from the interplay of input population data resolutions (based on census Units) and the elevation data. Urban and rural areas are differentiated by the GRUMPv1 Urban Extents. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN).

Series Name: Countries that have conducted at least one population and housing census in the last 10 years (1 = YES; 0 = NO)Series Code: SG_REG_CENSUSNRelease Version: 2020.Q2.G.03 This dataset is the part of the Global SDG Indicator Database compiled through the UN System in preparation for the Secretary-General's annual report on Progress towards the Sustainable Development Goals.Indicator 17.19.2: Proportion of countries that (a) have conducted at least one population and housing census in the last 10 years; and (b) have achieved 100 per cent birth registration and 80 per cent death registrationTarget 17.19: By 2030, build on existing initiatives to develop measurements of progress on sustainable development that complement gross domestic product, and support statistical capacity-building in developing countriesGoal 17: Strengthen the means of implementation and revitalize the Global Partnership for Sustainable DevelopmentFor more information on the compilation methodology of this dataset, see https://unstats.un.org/sdgs/metadata/

Analysis of ‘Population with at least upper secondary education by age group and country’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from http://data.europa.eu/88u/dataset/https-www-datenportal-bmbf-de-portal-0-21 on 17 January 2022.

--- Dataset description provided by original source is as follows ---

Table 0.21: Population with at least upper secondary education by age group and country

--- Original source retains full ownership of the source dataset ---

This Religion and State-Minorities (RASM) dataset is supplemental to the Religion and State Round 2 (RAS2) dataset. It codes the RAS religious discrimination variable using the minority as the unit of analysis (RAS2 uses a country as the unit of analysis and, is a general measure of all discrimination in the country). RASM codes religious discrimination by governments against all 566 minorities in 175 countries which make a minimum population cut off. Any religious minority which is at least 0.25 percent of the population or has a population of at least 500,000 (in countries with populations of 200 million or more) are included. The dataset also includes all Christian minorities in Muslim countries and all Muslim minorities in Christian countries for a total of 597 minorities. The data cover 1990 to 2008 with yearly codings.

These religious discrimination variables are designed to examine restrictions the government places on the practice of religion by minority religious groups. It is important to clarify two points. First, these variables focus on restrictions on minority religions. Restrictions that apply to all religions are not coded in this set of variables. This is because the act of restricting or regulating the religious practices of minorities is qualitatively different from restricting or regulating all religions. Second, this set of variables focuses only on restrictions of the practice of religion itself or on religious institutions and does not include other types of restrictions on religious minorities. The reasoning behind this is that there is much more likely to be a religious motivation for restrictions on the practice of religion than there is for political, economic, or cultural restrictions on a religious minority. These secular types of restrictions, while potentially motivated by religion, also can be due to other reasons. That political, economic, and cultural restrictions are often placed on ethnic minorities who share the same religion and the majority group in their state is proof of this.

This set of variables is essentially a list of specific types of religious restrictions which a government may place on some or all minority religions. These variables are identical to those included in the RAS2 dataset, save that one is not included because it focuses on foreign missionaries and this set of variables focuses on minorities living in the country. Each of the items in this category is coded on the following scale:

0. The activity is not restricted or the government does not engage in this practice.
1. The activity is restricted slightly or sporadically or the government engages in a mild form of this practice or a severe form sporadically.
2. The activity is significantly restricted or the government engages in this activity often and on a large scale.

A composite version combining the variables to create a measure of religious discrimination against minority religions which ranges from 0 to 48 also is included.

ARDA Note: This file was revised on October 6, 2017. At the PIs request, we removed the variable reporting on the minority's percentage of a country's population after finding inconsistencies with the reported values. For detailed data on religious demographics, see the "/data-archive?fid=RCSREG2" Target="_blank">Religious Characteristics of States Dataset Project.

About this dataset

Context

The dataset tabulates the Brazos Country population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Brazos Country. The dataset can be utilized to understand the population distribution of Brazos Country by age. For example, using this dataset, we can identify the largest age group in Brazos Country.

Key observations

The largest age group in Brazos Country, TX was for the group of age 20 to 24 years years with a population of 92 (15.46%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Brazos Country, TX was the Under 5 years years with a population of 2 (0.34%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Brazos Country is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Brazos Country total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Brazos Country Population by Age. You can refer the same here

Population density per pixel at 100 metre resolution. WorldPop provides estimates of numbers of people residing in each 100x100m grid cell for every low and middle income country. Through ingegrating cencus, survey, satellite and GIS datasets in a flexible machine-learning framework, high resolution maps of population counts and densities for 2000-2020 are produced, along with accompanying metadata. DATASET: Alpha version 2010 and 2015 estimates of numbers of people per grid square, with national totals adjusted to match UN population division estimates (http://esa.un.org/wpp/) and remaining unadjusted. REGION: Africa SPATIAL RESOLUTION: 0.000833333 decimal degrees (approx 100m at the equator) PROJECTION: Geographic, WGS84 UNITS: Estimated persons per grid square MAPPING APPROACH: Land cover based, as described in: Linard, C., Gilbert, M., Snow, R.W., Noor, A.M. and Tatem, A.J., 2012, Population distribution, settlement patterns and accessibility across Africa in 2010, PLoS ONE, 7(2): e31743. FORMAT: Geotiff (zipped using 7-zip (open access tool): www.7-zip.org) FILENAMES: Example - AGO10adjv4.tif = Angola (AGO) population count map for 2010 (10) adjusted to match UN national estimates (adj), version 4 (v4). Population maps are updated to new versions when improved census or other input data become available. Sudan data available from WorldPop here.

This dataset provides values for POPULATION reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

Abstract

Round 1 of the Afrobarometer survey was conducted from July 1999 through June 2001 in 12 African countries, to solicit public opinion on democracy, governance, markets, and national identity. The full 12 country dataset released was pieced together out of different projects, Round 1 of the Afrobarometer survey,the old Southern African Democracy Barometer, and similar surveys done in West and East Africa.

The 7 country dataset is a subset of the Round 1 survey dataset, and consists of a combined dataset for the 7 Southern African countries surveyed with other African countries in Round 1, 1999-2000 (Botswana, Lesotho, Malawi, Namibia, South Africa, Zambia and Zimbabwe). It is a useful dataset because, in contrast to the full 12 country Round 1 dataset, all countries in this dataset were surveyed with the identical questionnaire

Geographic coverage

Botswana Lesotho Malawi Namibia South Africa Zambia Zimbabwe

Analysis unit

Basic units of analysis that the study investigates include: individuals and groups

Kind of data

Sample survey data [ssd]

Sampling procedure

A new sample has to be drawn for each round of Afrobarometer surveys. Whereas the standard sample size for Round 3 surveys will be 1200 cases, a larger sample size will be required in societies that are extremely heterogeneous (such as South Africa and Nigeria), where the sample size will be increased to 2400. Other adaptations may be necessary within some countries to account for the varying quality of the census data or the availability of census maps.

The sample is designed as a representative cross-section of all citizens of voting age in a given country. The goal is to give every adult citizen an equal and known chance of selection for interview. We strive to reach this objective by (a) strictly applying random selection methods at every stage of sampling and by (b) applying sampling with probability proportionate to population size wherever possible. A randomly selected sample of 1200 cases allows inferences to national adult populations with a margin of sampling error of no more than plus or minus 2.5 percent with a confidence level of 95 percent. If the sample size is increased to 2400, the confidence interval shrinks to plus or minus 2 percent.

Sample Universe

The sample universe for Afrobarometer surveys includes all citizens of voting age within the country. In other words, we exclude anyone who is not a citizen and anyone who has not attained this age (usually 18 years) on the day of the survey. Also excluded are areas determined to be either inaccessible or not relevant to the study, such as those experiencing armed conflict or natural disasters, as well as national parks and game reserves. As a matter of practice, we have also excluded people living in institutionalized settings, such as students in dormitories and persons in prisons or nursing homes.

What to do about areas experiencing political unrest? On the one hand we want to include them because they are politically important. On the other hand, we want to avoid stretching out the fieldwork over many months while we wait for the situation to settle down. It was agreed at the 2002 Cape Town Planning Workshop that it is difficult to come up with a general rule that will fit all imaginable circumstances. We will therefore make judgments on a case-by-case basis on whether or not to proceed with fieldwork or to exclude or substitute areas of conflict. National Partners are requested to consult Core Partners on any major delays, exclusions or substitutions of this sort.

Sample Design

The sample design is a clustered, stratified, multi-stage, area probability sample.

To repeat the main sampling principle, the objective of the design is to give every sample element (i.e. adult citizen) an equal and known chance of being chosen for inclusion in the sample. We strive to reach this objective by (a) strictly applying random selection methods at every stage of sampling and by (b) applying sampling with probability proportionate to population size wherever possible.

In a series of stages, geographically defined sampling units of decreasing size are selected. To ensure that the sample is representative, the probability of selection at various stages is adjusted as follows:

The sample is stratified by key social characteristics in the population such as sub-national area (e.g. region/province) and residential locality (urban or rural). The area stratification reduces the likelihood that distinctive ethnic or language groups are left out of the sample. And the urban/rural stratification is a means to make sure that these localities are represented in their correct proportions. Wherever possible, and always in the first stage of sampling, random sampling is conducted with probability proportionate to population size (PPPS). The purpose is to guarantee that larger (i.e., more populated) geographical units have a proportionally greater probability of being chosen into the sample. The sampling design has four stages

A first-stage to stratify and randomly select primary sampling units;

A second-stage to randomly select sampling start-points;

A third stage to randomly choose households;

A final-stage involving the random selection of individual respondents

We shall deal with each of these stages in turn.

STAGE ONE: Selection of Primary Sampling Units (PSUs)

The primary sampling units (PSU's) are the smallest, well-defined geographic units for which reliable population data are available. In most countries, these will be Census Enumeration Areas (or EAs). Most national census data and maps are broken down to the EA level. In the text that follows we will use the acronyms PSU and EA interchangeably because, when census data are employed, they refer to the same unit.

We strongly recommend that NIs use official national census data as the sampling frame for Afrobarometer surveys. Where recent or reliable census data are not available, NIs are asked to inform the relevant Core Partner before they substitute any other demographic data. Where the census is out of date, NIs should consult a demographer to obtain the best possible estimates of population growth rates. These should be applied to the outdated census data in order to make projections of population figures for the year of the survey. It is important to bear in mind that population growth rates vary by area (region) and (especially) between rural and urban localities. Therefore, any projected census data should include adjustments to take such variations into account.

Indeed, we urge NIs to establish collegial working relationships within professionals in the national census bureau, not only to obtain the most recent census data, projections, and maps, but to gain access to sampling expertise. NIs may even commission a census statistician to draw the sample to Afrobarometer specifications, provided that provision for this service has been made in the survey budget.

Regardless of who draws the sample, the NIs should thoroughly acquaint themselves with the strengths and weaknesses of the available census data and the availability and quality of EA maps. The country and methodology reports should cite the exact census data used, its known shortcomings, if any, and any projections made from the data. At minimum, the NI must know the size of the population and the urban/rural population divide in each region in order to specify how to distribute population and PSU's in the first stage of sampling. National investigators should obtain this written data before they attempt to stratify the sample.

Once this data is obtained, the sample population (either 1200 or 2400) should be stratified, first by area (region/province) and then by residential locality (urban or rural). In each case, the proportion of the sample in each locality in each region should be the same as its proportion in the national population as indicated by the updated census figures.

Having stratified the sample, it is then possible to determine how many PSU's should be selected for the country as a whole, for each region, and for each urban or rural locality.

The total number of PSU's to be selected for the whole country is determined by calculating the maximum degree of clustering of interviews one can accept in any PSU. Because PSUs (which are usually geographically small EAs) tend to be socially homogenous we do not want to select too many people in any one place. Thus, the Afrobarometer has established a standard of no more than 8 interviews per PSU. For a sample size of 1200, the sample must therefore contain 150 PSUs/EAs (1200 divided by 8). For a sample size of 2400, there must be 300 PSUs/EAs.

These PSUs should then be allocated proportionally to the urban and rural localities within each regional stratum of the sample. Let's take a couple of examples from a country with a sample size of 1200. If the urban locality of Region X in this country constitutes 10 percent of the current national population, then the sample for this stratum should be 15 PSUs (calculated as 10 percent of 150 PSUs). If the rural population of Region Y constitutes 4 percent of the current national population, then the sample for this stratum should be 6 PSU's.

The next step is to select particular PSUs/EAs using random methods. Using the above example of the rural localities in Region Y, let us say that you need to pick 6 sample EAs out of a census list that contains a total of 240 rural EAs in Region Y. But which 6? If the EAs created by the national census bureau are of equal or roughly equal population size, then selection is relatively straightforward. Just number all EAs consecutively, then make six selections using a table of random numbers. This procedure, known as simple random sampling (SRS), will

Analysis of ‘Country Socioeconomic Status Scores: 1880-2010’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://www.kaggle.com/sdorius/globses on 14 February 2022.

--- Dataset description provided by original source is as follows ---

This dataset contains estimates of the socioeconomic status (SES) position of each of 149 countries covering the period 1880-2010. Measures of SES, which are in decades, allow for a 130 year time-series analysis of the changing position of countries in the global status hierarchy. SES scores are the average of each country’s income and education ranking and are reported as percentile rankings ranging from 1-99. As such, they can be interpreted similarly to other percentile rankings, such has high school standardized test scores. If country A has an SES score of 55, for example, it indicates that 55 percent of the world’s people live in a country with a lower average income and education ranking than country A. ISO alpha and numeric country codes are included to allow users to merge these data with other variables, such as those found in the World Bank’s World Development Indicators Database and the United Nations Common Database.

See here for a working example of how the data might be used to better understand how the world came to look the way it does, at least in terms of status position of countries.

VARIABLE DESCRIPTIONS: UNID: ISO numeric country code (used by the United Nations) WBID: ISO alpha country code (used by the World Bank) SES: Socioeconomic status score (percentile) based on GDP per capita and educational attainment (n=174) country: Short country name year: Survey year SES: Socioeconomic status score (1-99) for each of 174 countries gdppc: GDP per capita: Single time-series (imputed) yrseduc: Completed years of education in the adult (15+) population popshare: Total population shares

DATA SOURCES: The dataset was compiled by Shawn Dorius (sdorius@iastate.edu) from a large number of data sources, listed below. GDP per Capita: 1. Maddison, Angus. 2004. 'The World Economy: Historical Statistics'. Organization for Economic Co-operation and Development: Paris. Maddison population data in 000s; GDP & GDP per capita data in (1990 Geary-Khamis dollars, PPPs of currencies and average prices of commodities). Maddison data collected from: http://www.ggdc.net/MADDISON/Historical_Statistics/horizontal-file_02-2010.xls. 2. World Development Indicators Database Years of Education 1. Morrisson and Murtin.2009. 'The Century of Education'. Journal of Human Capital(3)1:1-42. Data downloaded from http://www.fabricemurtin.com/ 2. Cohen, Daniel & Marcelo Cohen. 2007. 'Growth and human capital: Good data, good results' Journal of economic growth 12(1):51-76. Data downloaded from http://soto.iae-csic.org/Data.htm 3. Barro, Robert and Jong-Wha Lee, 2013, "A New Data Set of Educational Attainment in the World, 1950-2010." Journal of Development Economics, vol 104, pp.184-198. Data downloaded from http://www.barrolee.com/ Total Population 1. Maddison, Angus. 2004. 'The World Economy: Historical Statistics'. Organization for Economic Co-operation and Development: Paris. 13.
2. United Nations Population Division. 2009.

--- Original source retains full ownership of the source dataset ---

The Low Elevation Coastal Zone (LECZ) Global Delta Urban-Rural Population and Land Area Estimates, Version 1 data set provides country-level estimates of urban, quasi-urban, rural, and total population (count), land area (square kilometers), and built-up areas in river delta- and non-delta contexts for 246 statistical areas (countries and other UN-recognized territories) for the years 1990, 2000, 2014 and 2015. The population estimates are disaggregated such that compounding risk factors including elevation, settlement patterns, and delta zones can be cross-examined. The Intergovernmental Panel on Climate Change (IPCC) recently concluded that without significant adaptation and mitigation action, risk to coastal commUnities will increase at least one order of magnitude by 2100, placing people, property, and environmental resources at greater risk. Greater-risk zones were then generated: 1) the global extent of two low-elevation zones contiguous to the coast, one bounded by an upper elevation of 10m (LECZ10), and one by an upper elevation of 5m (LECZ05); 2) the extent of the world's major deltas; 3) the distribution of people and built-up area around the world; 4) the extents of urban centers around the world. The data are layered spatially, along with political and land/water boundaries, allowing the densities and quantities of population and built-up area, as well as levels of urbanization (defined as the share of population living in "urban centers") to be estimated for any country or region, both inside and outside the LECZs and deltas, and at two points in time (1990 and 2015). In using such estimates of populations living in 5m and 10m LECZs and outside of LECZs, policymakers can make informed decisions based on perceived exposure and vulnerability to potential damages from sea level rise.

The Low Elevation Coastal Zone (LECZ) Urban-Rural Population Estimates consists of country-level estimates of urban, rural and total population and land area country-wide and in the LECZ, if applicable. Additionally, the data set provides the number of urban extents, their population and land area that intersect the LECZ, by city-size population classifications of less than 100,000, 100,000 to 500,000, 500,000 to 1,000,000, 1,000,000 to 5,000,000, and more than 5,000,000. All estimates are based on GRUMP Alpha data products. The LECZ was generated using SRTM Digital Elevation Model data and includes all land area that is contiguous with the coast and 10 meters or less in elevation. All grids used for population, land area, urban mask, and LECZ were of 30 arc-second (~1 km ) resolution. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with the International Institute for Environment and Development (IIED).

Population density per pixel at 100 metre resolution. WorldPop provides estimates of numbers of people residing in each 100x100m grid cell for every low and middle income country. Through ingegrating cencus, survey, satellite and GIS datasets in a flexible machine-learning framework, high resolution maps of population counts and densities for 2000-2020 are produced, along with accompanying metadata. DATASET: Alpha version 2010 and 2015 estimates of numbers of people per grid square, with national totals adjusted to match UN population division estimates (http://esa.un.org/wpp/) and remaining unadjusted. REGION: Africa SPATIAL RESOLUTION: 0.000833333 decimal degrees (approx 100m at the equator) PROJECTION: Geographic, WGS84 UNITS: Estimated persons per grid square MAPPING APPROACH: Land cover based, as described in: Linard, C., Gilbert, M., Snow, R.W., Noor, A.M. and Tatem, A.J., 2012, Population distribution, settlement patterns and accessibility across Africa in 2010, PLoS ONE, 7(2): e31743. FORMAT: Geotiff (zipped using 7-zip (open access tool): www.7-zip.org) FILENAMES: Example - AGO10adjv4.tif = Angola (AGO) population count map for 2010 (10) adjusted to match UN national estimates (adj), version 4 (v4). Population maps are updated to new versions when improved census or other input data become available. India data available from WorldPop here.

About this dataset

Context

The dataset presents the mean household income for each of the five quintiles in Country Club Hills, MO, as reported by the U.S. Census Bureau. The dataset highlights the variation in mean household income across quintiles, offering valuable insights into income distribution and inequality.

Key observations

• Income disparities: The mean income of the lowest quintile (20% of households with the lowest income) is 14,726, while the mean income for the highest quintile (20% of households with the highest income) is 95,984. This indicates that the top earners earn 7 times compared to the lowest earners.
• *Top 5%: * The mean household income for the wealthiest population (top 5%) is 131,183, which is 136.67% higher compared to the highest quintile, and 890.83% higher compared to the lowest quintile.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Income Levels:

• Lowest Quintile
• Second Quintile
• Third Quintile
• Fourth Quintile
• Highest Quintile
• Top 5 Percent

Variables / Data Columns

• Income Level: This column showcases the income levels (As mentioned above).
• Mean Household Income: Mean household income, in 2023 inflation-adjusted dollars for the specific income level.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Country Club Hills median household income. You can refer the same here

The European Copernicus Coastal Flood Awareness System (ECFAS) project will contribute to the evolution of the Copernicus Emergency Monitoring Service by demonstrating the technical and operational feasibility of a European Coastal Flood Awareness System. Specifically, ECFAS will provide a much-needed solution to bolster coastal resilience to climate risk and reduce population and infrastructure exposure by monitoring and supporting disaster preparedness, two factors that are fundamental to damage prevention and recovery if a storm hits.

The ECFAS Proof-of-Concept development will run from January 2021-December 2022. The ECFAS project is a collaboration between Istituto Universitario di Studi Superiori IUSS di Pavia (Italy, ECFAS Coordinator), Mercator Ocean International (France), Planetek Hellas (Greece), Collecte Localisation Satellites (France), Consorzio Futuro in Ricerca (Italy), Universitat Politecnica de Valencia (Spain), University of the Aegean (Greece), and EurOcean (Portugal), and is funded by the European Commission H2020 Framework Programme within the call LC-SPACE-18-EO-2020 - Copernicus evolution: research activities in support of the evolution of the Copernicus services.

This project has received funding from the European Union’s Horizon 2020 programme

The deliverables will have restricted access at least until the end of ECFAS

Description of the containing files inside the Dataset.

The dataset was divided at European country level, except the Adriatic area which was extracted as a region and not on a country level due to the small size of the countries. The buffer zone of each data was 10km inland in order to be correlated with the new Copernicus product Coastal Zone LU/LC.

Specifically, the dataset includes the new Coastal LU/LC product which was implemented by the EEA and became available at the end of 2020. Additional information collected in relation to the location and characteristics of transport (road and railway) and utility networks (power plants), population density and time variability. Furthermore, some of the publicly available datasets that were used in CEMS related to the abovementioned assets were gathered such as OpenStreetMap (building footprints, road and railway network infrastructures), GeoNames (populated places but also names of administrative units, rivers and lakes, forests, hills and mountains, parks and recreational areas, etc.), the Global Human Settlement Layer (GHS) and Global Human Settlement Population Grid (GHS-POP) generated by JRC. Also, the dataset contains 2 layers with statistics information regarding the population of Europe per sex and age divided in administrative units at NUTS level 3. The first layers includes information fro the whole Europe and the second layer has only the information regaridng the population at the Coastal area. Finally, the dataset includes the global database of Floods protection standars. Below there are tables which present the dataset.

* Adriatic folder contains the countries: Slovenia, Croatia, Montenegro, Albania, Bosnia and Herzegovina

* Malta was added to the dataset

Copernicus Land Monitoring Service	Resolution	Comment
Coastal LU/LC	1:10.000	A Copernicus hotspot product to monitor landscape dynamics in coastal zones
EU-Hydro - Coastline	1:30.000	EU-Hydro is a dataset for all European countries providing the coastline
Natura 2000	1: 100000	A Copernicus hotspot product to monitor important areas for nature conservation
European Settlement Map	10m	A spatial raster dataset that is mapping human settlements in Europe
Imperviousness Density	10m	The percentage of sealed area
Impervious Built-up	10m	The part of the sealed surfaces where buildings can be found
Grassland 2018	10m	A binary grassland/non-grassland product
Tree Cover Density 2018	10m	Level of tree cover density in a range from 0-100%

Joint Research Center	Resolution	Comment
Global Human Settlement Population Grid GHS-POP)	250m	Residential population estimates for target year 2015
GHS settlement model layer (GHS-SMOD)	1km	The GHS Settlement Model grid delineates and classify settlement typologies via a logic of population size, population and built-up area densities
GHS-BUILT	10m	Built-up grid derived from Sentinel-2 global image composite for reference year 2018
ENACT 2011 Population Grid (ENACT-POP R2020A)	1km	The ENACT is a population density for the European Union that take into account major daily and monthly population variations
JRC Open Power Plants Database (JRC-PPDB-OPEN)	-	Europe’s open power plant database
GHS functional urban areas (GHS-FUA R2019A)	1km	City and its commuting zone (area of influence of the city in terms of labour market flows)
GHS Urban Centre Database (GHS-UCDB R2019A)	1km	Urban Centres defined by specific cut-off values on resident population and built-up surface

Additional Data	Resolution	Comment
Open Street Map (OSM)	-	BF, Transportation Network, Utilities Network, Places of Interest
CEMS	-	Data from Rapid Mapping activations in Europe
GeoNames	-	Populated places, Adm. units, Hydrography, Forests, Hills/Mountains, Parks, etc.
Global Administrative Areas	-	Administrative areas of all countries, at all levels of sub-division
NUTS3 Population Age/Sex Group	-	Eurostat population by age ansd sex statistics interesected with the NUTS3 Units
FLOPROS		A global database of FLOod PROtection Standards, which comprises information in the form of the flood return period associated with protection measures, at different spatial scales

Disclaimer:

ECFAS partners provide the data "as is" and "as available" without warranty of any kind. The ECFAS partners shall not be held liable resulting from the use of the information and data provided.

This project has received funding from the Horizon 2020 research and innovation programme under grant agreement No. 101004211