This layer presents the best-known point and perimeter locations of wildfire occurrences within the United States over the past 7 days. Points mark a location within the wildfire area and provide current information about that wildfire. Perimeters are the line surrounding land that has been impacted by a wildfire. Consumption Best Practices:As a service that is subject to very high usage, ensure peak performance and accessibility of your maps and apps by avoiding the use of non-cacheable relative Date/Time field filters. To accommodate filtering events by Date/Time, we suggest using the included "Age" fields that maintain the number of days or hours since a record was created or last modified, compared to the last service update. These queries fully support the ability to cache a response, allowing common query results to be efficiently provided to users in a high demand service environment. When ingesting this service in your applications, avoid using POST requests whenever possible. These requests can compromise performance and scalability during periods of high usage because they too are not cacheable. Source:  Wildfire points are sourced from Integrated Reporting of Wildland-Fire Information (IRWIN) and perimeters from National Interagency Fire Center (NIFC).  Current Incidents: This layer provides a near real-time view of the data being shared through the Integrated Reporting of Wildland-Fire Information (IRWIN) service. IRWIN provides data exchange capabilities between participating wildfire systems, including federal, state and local agencies. Data is synchronized across participating organizations to make sure the most current information is available. The display of the points are based on the NWCG Fire Size Classification applied to the daily acres attribute. Current Perimeters: This layer displays fire perimeters posted to the National Incident Feature Service. It is updated from operational data and may not reflect current conditions on the ground. For a better understanding of the workflows involved in mapping and sharing fire perimeter data, see the National Wildfire Coordinating Group Standards for Geospatial Operations. Update Frequency:  Every 15 minutes using the Aggregated Live Feed Methodology based on the following filters:Events modified in the last 7 daysEvents that are not given a Fire Out DateIncident Type Kind: FiresIncident Type Category: Prescribed Fire, Wildfire, and Incident Complex Area Covered: United StatesWhat can I do with this layer? The data includes basic wildfire information, such as location, size, environmental conditions, and resource summaries. Features can be filtered by incident name, size, or date keeping in mind that not all perimeters are fully attributed. Attribute InformationThis is a list of attributes that benefit from additional explanation. Not all attributes are listed. Incident Type Category: This is a breakdown of events into more specific categories.Wildfire (WF) -A wildland fire originating from an unplanned ignition, such as lightning, volcanos, unauthorized and accidental human caused fires, and prescribed fires that are declared wildfires. Prescribed Fire (RX) - A wildland fire originating from a planned ignition in accordance with applicable laws, policies, and regulations to meet specific objectives. Incident Complex (CX) - An incident complex is two or more individual incidents in the same general proximity that are managed together under one Incident Management Team. This allows resources to be used across the complex rather than on individual incidents uniting operational activities. IrwinID: Unique identifier assigned to each incident record in both point and perimeter layers. Acres: these typically refer to the number of acres within the current perimeter of a specific, individual incident, including unburned and unburnable islands.Discovery: An estimate of acres burning upon the discovery of the fire.Calculated or GIS:  A measure of acres calculated (i.e., infrared) from a geospatial perimeter of a fire.Daily: A measure of acres reported for a fire.Final: The measure of acres within the final perimeter of a fire. More specifically, the number of acres within the final fire perimeter of a specific, individual incident, including unburned and unburnable islands. Dates: the various systems contribute date information differently so not all fields will be populated for every fire.FireDiscovery: The date and time a fire was reported as discovered or confirmed to exist. May also be the start date for reporting purposes. Containment: The date and time a wildfire was declared contained. Control: The date and time a wildfire was declared under control.ICS209Report: The date and time of the latest approved ICS-209 report.Current: The date and time a perimeter is last known to be updated.FireOut: The date and time when a fire is declared out.ModifiedOnAge: (Integer) Computed days since event last modified.DiscoveryAge: (Integer) Computed days since event's fire discovery date.CurrentDateAge: (Integer) Computed days since perimeter last modified.CreateDateAge: (Integer) Computed days since perimeter entry created. GACC: A code that identifies one of the wildland fire geographic area coordination centers. A geographic area coordination center is a facility that is used for the coordination of agency or jurisdictional resources in support of one or more incidents within a geographic coordination area.Fire Mgmt Complexity: The highest management level utilized to manage a wildland fire event. Incident Management Organization: The incident management organization for the incident, which may be a Type 1, 2, or 3 Incident Management Team (IMT), a Unified Command, a Unified Command with an IMT, National Incident Management Organization (NIMO), etc. This field is null if no team is assigned. Unique Fire Identifier: Unique identifier assigned to each wildland fire. yyyy = calendar year, SSUUUU = Point Of Origin (POO) protecting unit identifier (5 or 6 characters), xxxxxx = local incident identifier (6 to 10 characters) RevisionsJan 4, 2021: Added Integer fields 'Days Since...' to Current_Incidents point layer and Current_Perimeters polygon layer. These fields are computed when the data is updated, reflecting the current number of days since each record was last updated. This will aid in making 'age' related, cache friendly queries.Mar 12, 2021: Added second set of 'Age' fields for Event and Perimeter record creation, reflecting age in Days since service data update.Apr 21, 2021: Current_Perimeters polygon layer is now being populated by NIFC's newest data source. A new field was added, 'IncidentTypeCategory' to better distinguish Incident types for Perimeters and now includes type 'CX' or Complex Fires. Five fields were not transferrable, and as a result 'Comments', 'Label', 'ComplexName', 'ComplexID', and 'IMTName' fields will be Null moving forward.Apr 26, 2021: Updated Incident Layer Symbology to better clarify events, reduce download size and overhead of symbols. Updated Perimeter Layer Symbology to better distingish between Wildfires and Prescribed Fires.May 5, 2021: Slight modification to Arcade logic for Symbology, refining Age comparison to Zero for fires in past 24-hours.Aug 16, 2021: Enabled Time Series capability on Layers (off by default) using 'Fire Discovery Date' for Incidents and 'Creation Date' for Perimeters. This layer is provided for informational purposes and is not monitored 24/7 for accuracy and currency.If you would like to be alerted to potential issues or simply see when this Service will update next, please visit our Live Feed Status Page!

This ArcGIS Online hosted feature service displays perimeters from the National Incident Feature Service (NIFS) that meet ALL of the following criteria:

This map contains live feed sources for US current wildfire locations and perimeters, VIIRS and MODIS hot spots, wildfire conditions / red flag warnings, and wildfire potential. Each of these layers provides insight into where a fire is located, its intensity and the surrounding areas susceptibility to wildfire. Find out more about the Esri Disaster Response Program: www.esri.com/disaster About the Data: Click on the links in the LAYERS section for details about each layer Wildfire: This displays large active fire incidents and situation reports that have been entered into the National Interagency Fire Center (NIFC) database by local emergency response teams. The final official perimeter should be obtained from the host unit, which can be determined by looking at the Unit Id for any specific fire. The host unit is responsible for producing official and final perimeters for all incidents in their jurisdiction.Hot Spot: The MODIS and VIIRS thermal layers are created from the MODIS satellite detection system and represents hot spots that could be potential fire locations in the last 24 hour period at a horizontal resolution of 1 km and temporal resolution of 1 to 2 days. Wind Data (NOAA METAR): Typical METAR contains data for the temperature, dew point, wind speed and direction, precipitation, cloud cover and heights, visibility, and barometric pressure. A METAR may also contain information on precipitation amounts, lightning, and other information. Red Flag Warnings: Filtered from the Weather Watches and Warnings layer.

The FinalFirePerimeter polygon layer represents final mapped wildland fire perimeters. This feature class is a subset of the FirePerimeters feature class. Incidents of 10 acres or greater in size are expected. Incidents smaller than 10 acres in size may also be included. Data are maintained at the Forest/District level, or their equivalent, to track the area affected by wildland fire. Records in FirePerimeter include perimeters for wildland fires that have corresponding records in FIRESTAT, which is the authoritative data source for all wildland fire reports. FIRESTAT, the Fire Statistics System computer application, required by the USFS for all wildland fire occurrences on National Forest System Lands or National Forest-protected lands, is used to enter and maintain information from the Individual Fire Report (FS-5100-29).National USFS fire occurrence final fire perimeters where wildland fires have historically occurred on National Forest System Lands and/or where protection is the responsibility of the US Forest Service. Knowing where wildland fire events have happened in the past is critical to land management efforts in the future.This data is utilized by fire & aviation staffs, land managers, land planners, and resource specialists on and around National Forest System Lands.*This data has been updated to match 2021 National GIS Data Dictionary Standards.Metadata and Downloads

Wildland fires, commonly called wildfires, originate from many sources and can have a wide range of impacts. Collecting consistent information on when a fire starts, the cause, and how large of an area they impact can be difficult as many different agencies (local, state, federal) are involved in responding. This was especially true before coordinated multi-agency efforts were established in the late 2000s. In an effort to create a temporally consistent analysis of wildland fires in the USA, the US Geological Survey and Forest Service have teamed up to create the Monitoring Trends in Burn Severity program (MTBS). Using Landsat's 40+ year archive of satellite observations of burn scars, MTBS is able to consistently assess and document the effects of fire at a national scale. With the establishment of IRWIN, MTBS has been able to integrate their database of fires into its products. IRWIN data will be replaced by NIFC in subsequent versions of the data. Fire Type definitionsWildfire - An unplanned, unwanted wildland fire including unauthorized human-caused fires, escaped wildland fire use events, escaped prescribed fire projects, and all other wildland fires where the objective is to put the fire out (definition currently under NWCG review).Prescribed Fire - Any fire intentionally ignited by management actions in accordance with applicable laws, policies, and regulations to meet specific objectives.Wildland Fire Use - An event dealing with the management of a naturally ignited wildland fire to accomplish specific prestated resource management objectives in predefined geographic areas outlined in the Fire Management Plans.Unknown - A fire event whose incident type was not reported from the original reporting agency.Complex - Two or more individual incidents located in the same general area which are assigned to a single incident commander or unified command.Out of Area Response - Multiple resource response to a wildfire incident. This term applies exclusively to wildfire incidents.TimeA time field is included for animating or querying. To animate the map, select the map Options and "Enable Time Animation."UpdatesThis layer will be updated once a year with the regular releases of data by MTBS.

National burn probability (BP) and conditional fire intensity level (FIL) data were generated for the conterminous United States (US) using a geospatial Fire Simulation (FSim) system developed by the US Forest Service Missoula Fire Sciences Laboratory to estimate probabilistic components of wildfire risk (Finney et al. [2011]). The FSim system includes modules for weather generation, wildfire occurrence, fire growth, and fire suppression. FSim is designed to simulate the occurrence and growth of wildfires under tens of thousands of hypothetical contemporary fire seasons in order to estimate the probability of a given area (i.e., pixel) burning under current landscape conditions and fire management practices. The data presented here represent modeled BP and FIL for the conterminous US at a 270-meter grid spatial resolution. The six FILs correspond to flame-length classes as follows: FIL1 = < 2 feet (ft); FIL2 = 2 < 4 ft.; FIL3 = 4 < 6 ft.; FIL4 = 6 < 8 ft.; FIL5 = 8 < 12 ft.; FIL6 = 12+ ft. Because they indicate conditional probabilities (i.e., representing the likelihood of burning at a certain intensity level, given that a fire occurs), the FIL*_20160830 data must be used in conjunction with the BP_20160830 data for risk assessment.

Burn severity layers are thematic images depicting severity as unburned to low, low, moderate, high, and increased greenness (increased post-fire vegetation response). The layer may also have a sixth class representing a mask for clouds, shadows, large water bodies, or other features on the landscape that erroneously affect the severity classification. This data has been prepared as part of the Monitoring Trends in Burn Severity (MTBS) project. Due to the lack of comprehensive fire reporting information and quality Landsat imagery, burn severity for all targeted MTBS fires are not available. Additionally, the availability of burn severity data for fires occurring in the current and previous calendar year is variable since these data are currently in production and released on an intermittent basis by the MTBS project.This record was taken from the USDA Enterprise Data Inventory that feeds into the https://data.gov catalog. Data for this record includes the following resources: ISO-19139 metadata ArcGIS Hub Dataset ArcGIS GeoService For complete information, please visit https://data.gov.

The FirePerimeter polygon layer represents daily and final mapped wildland fire perimeters. Incidents of 10 acres or greater in size are expected. Incidents smaller than 10 acres in size may also be included. Data are maintained at the Forest/District level, or their equivalent, to track the area affected by wildland fire. Records in FirePerimeter include perimeters for wildland fires that have corresponding records in FIRESTAT, which is the authoritative data source for all wildland fire reports. FIRESTAT, the Fire Statistics System computer application, required by the USFS for all wildland fire occurrences on National Forest System Lands or National Forest-protected lands, is used to enter and maintain information from the Individual Fire Report (FS-5100-29).National USFS fire occurrence final fire perimeters where wildland fires have historically occurred on National Forest System Lands and/or where protection is the responsibility of the US Forest Service. Knowing where wildland fire events have happened in the past is critical to land management efforts in the future.This data is utilized by fire & aviation staffs, land managers, land planners, and resource specialists on and around National Forest System Lands.*This data has been updated to match 2021 National GIS Data Dictionary Standards.Metadata and DownloadsThis record was taken from the USDA Enterprise Data Inventory that feeds into the https://data.gov catalog. Data for this record includes the following resources: ISO-19139 metadata ArcGIS Hub Dataset ArcGIS GeoService CSV Shapefile GeoJSON KML For complete information, please visit https://data.gov.

All data displayed on this map is near real-time. There are two ways in which this happens: Web service based data and a mobile mapping application called Field Maps. Web services are updated regularly ranging from every minute to once a month. All web services in this map are refreshed automatically to ensure the latest data being provided is displayed. Data collected through the use of Field Maps is done so by firefighters on the ground. The Field Maps application is consuming, creating, and editing data that are stored in ArcGIS Online. These data are then fed directly in to this map. To learn more about these web mapping technologies, visit the links below:Web ServicesArcGIS Field MapsArcGIS OnlineWeb Services used in this map:(visit link to learn more about each service)IRWIN - A central hub that orchestrates data between various fire reporting applications. When a new incident is created and/or updated by a dispatch center or other fire reporting system, it is then displayed on the map using the Integrated Reporting of Wildland-Fire Information (IRWIN) service. Automatically refreshes every five minutes:Fires by Cause - Any incident that has occurred year to date displayed by cause.ArcGIS Online/Field Maps - Part of the Esri Geospatial Cloud, ArcGIS Online and Collector enables firefighters to use web maps created in ArcGIS Online on mobile devices using the Collector application to capture and edit data on the fireline. Data may be captured and edited in both connected and disconnected environments. When data is submitted back to the web service in ArcGIS Online, it is then checked for accuracy and approved for public viewing.Fire Perimeter - Must be set to 'Approved' and 'Public' to be displayed on the map. Automatically refreshes every five minutes.

CAL FIRE's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, the National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data. This map highlights the recent large fires (≥5,000 acres) on a backdrop of all of the dataset's documented fire perimeters dating back to 1878. This map includes perimeters symbolized by decade, county boundaries, California vegetation, and NAIP imagery back to 2005. Popups provide a narrative of known details pertaining to each incident, including alarm and containment dates, GIS calculated acreage, and responding agency, among other attribution.This is the landing page map in the California Historical Wildland Fire Perimeters Exploratory App.For any questions, please contact the data steward:Kim Wallin, GIS SpecialistCAL FIRE, Fire & Resource Assessment Program (FRAP)kimberly.wallin@fire.ca.gov

The Geospatial Multi-Agency Coordination Group, or GeoMAC, is an internet-based mapping tool originally designed for fire managers to access online maps of current fire locations and perimeters in the continental United States, including Alaska.Active wildfires can be viewed in the USA Wildfire Activity Layer. Additional information about how to use fire perimeter data can be found in several blog posts:Learning about the Thomas Fire using ArcGIS Online and Living Atlas by Bern Szukalski Mapping the Inferno by Dan PisutFurther information about this data can be found here. All of these layers can be found in a corresponding web map which can be copied for customization. The layers in this map can be geoenriched with demographics or used in spatial analysis.Disclaimer: Wildland fire perimeters are submitted to GeoMAC by the incidents and then posted to the GeoMAC site for downloading. While every effort is made to provide accurate and complete information, there may be gaps in daily coverage. Please note: Files only contain perimeter data as they are submitted by the incidents. Files do not contain all fires. This data are not the authoritative fire perimeter data and should not be used as such.

Historical FiresLast updated on 06/17/2022OverviewThe national fire history perimeter data layer of conglomerated Agency Authoratative perimeters was developed in support of the WFDSS application and wildfire decision support for the 2021 fire season. The layer encompasses the final fire perimeter datasets of the USDA Forest Service, US Department of Interior Bureau of Land Management, Bureau of Indian Affairs, Fish and Wildlife Service, and National Park Service, the Alaska Interagency Fire Center, CalFire, and WFIGS History. Perimeters are included thru the 2021 fire season. Requirements for fire perimeter inclusion, such as minimum acreage requirements, are set by the contributing agencies. WFIGS, NPS and CALFIRE data now include Prescribed Burns. Data InputSeveral data sources were used in the development of this layer:Alaska fire history USDA FS Regional Fire History Data BLM Fire Planning and Fuels National Park Service - Includes Prescribed Burns Fish and Wildlife ServiceBureau of Indian AffairsCalFire FRAS - Includes Prescribed BurnsWFIGS - BLM & BIA and other S&LData LimitationsFire perimeter data are often collected at the local level, and fire management agencies have differing guidelines for submitting fire perimeter data. Often data are collected by agencies only once annually. If you do not see your fire perimeters in this layer, they were not present in the sources used to create the layer at the time the data were submitted. A companion service for perimeters entered into the WFDSS application is also available, if a perimeter is found in the WFDSS service that is missing in this Agency Authoratative service or a perimeter is missing in both services, please contact the appropriate agency Fire GIS Contact listed in the table below.AttributesThis dataset implements the NWCG Wildland Fire Perimeters (polygon) data standard.https://www.nwcg.gov/sites/default/files/stds/WildlandFirePerimeters_definition.pdfIRWINID - Primary key for linking to the IRWIN Incident dataset. The origin of this GUID is the wildland fire locations point data layer. (This unique identifier may NOT replace the GeometryID core attribute)INCIDENT - The name assigned to an incident; assigned by responsible land management unit. (IRWIN required). Officially recorded name.FIRE_YEAR (Alias) - Calendar year in which the fire started. Example: 2013. Value is of type integer (FIRE_YEAR_INT).AGENCY - Agency assigned for this fire - should be based on jurisdiction at origin.SOURCE - System/agency source of record from which the perimeter came.DATE_CUR - The last edit, update, or other valid date of this GIS Record. Example: mm/dd/yyyy.MAP_METHOD - Controlled vocabulary to define how the geospatial feature was derived. Map method may help define data quality.GPS-Driven; GPS-Flight; GPS-Walked; GPS-Walked/Driven; GPS-Unknown Travel Method; Hand Sketch; Digitized-Image; Digitized-Topo; Digitized-Other; Image Interpretation; Infrared Image; Modeled; Mixed Methods; Remote Sensing Derived; Survey/GCDB/Cadastral; Vector; OtherGIS_ACRES - GIS calculated acres within the fire perimeter. Not adjusted for unburned areas within the fire perimeter. Total should include 1 decimal place. (ArcGIS: Precision=10; Scale=1). Example: 23.9UNQE_FIRE_ - Unique fire identifier is the Year-Unit Identifier-Local Incident Identifier (yyyy-SSXXX-xxxxxx). SS = State Code or International Code, XXX or XXXX = A code assigned to an organizational unit, xxxxx = Alphanumeric with hyphens or periods. The unit identifier portion corresponds to the POINT OF ORIGIN RESPONSIBLE AGENCY UNIT IDENTIFIER (POOResonsibleUnit) from the responsible unit’s corresponding fire report. Example: 2013-CORMP-000001LOCAL_NUM - Local incident identifier (dispatch number). A number or code that uniquely identifies an incident for a particular local fire management organization within a particular calendar year. Field is string to allow for leading zeros when the local incident identifier is less than 6 characters. (IRWIN required). Example: 123456.UNIT_ID - NWCG Unit Identifier of landowner/jurisdictional agency unit at the point of origin of a fire. (NFIRS ID should be used only when no NWCG Unit Identifier exists). Example: CORMPCOMMENTS - Additional information describing the feature. Free Text.FEATURE_CA - Type of wildland fire polygon: Wildfire (represents final fire perimeter or last daily fire perimeter available) or Prescribed Fire or UnknownGEO_ID - Primary key for linking geospatial objects with other database systems. Required for every feature. This field may be renamed for each standard to fit the feature. Globally Unique Identifier (GUID).Cross-Walk from sources (GeoID) and other processing notesAK: GEOID = OBJECT ID of provided file geodatabase (4580 Records thru 2021), other federal sources for AK data removed. CA: GEOID = OBJECT ID of downloaded file geodatabase (12776 Records, federal fires removed, includes RX)FWS: GEOID = OBJECTID of service download combined history 2005-2021 (2052 Records). Handful of WFIGS (11) fires added that were not in FWS record.BIA: GEOID = "FireID" 2017/2018 data (416 records) provided or WFDSS PID (415 records). An additional 917 fires from WFIGS were added, GEOID=GLOBALID in source.NPS: GEOID = EVENT ID (IRWINID or FRM_ID from FOD), 29,943 records includes RX.BLM: GEOID = GUID from BLM FPER and GLOBALID from WFIGS. Date Current = best available modify_date, create_date, fire_cntrl_dt or fire_dscvr_dt to reduce the number of 9999 entries in FireYear. Source FPER (25,389 features), WFIGS (5357 features)USFS: GEOID=GLOBALID in source, 46,574 features. Also fixed Date Current to best available date from perimeterdatetime, revdate, discoverydatetime, dbsourcedate to reduce number of 1899 entries in FireYear.Relevant Websites and ReferencesAlaska Fire Service: https://afs.ak.blm.gov/CALFIRE: https://frap.fire.ca.gov/mapping/gis-dataBIA - data prior to 2017 from WFDSS, 2017-2018 Agency Provided, 2019 and after WFIGSBLM: https://gis.blm.gov/arcgis/rest/services/fire/BLM_Natl_FirePerimeter/MapServerNPS: New data set provided from NPS Fire & Aviation GIS. cross checked against WFIGS for any missing perimeters in 2021.https://nifc.maps.arcgis.com/home/item.html?id=098ebc8e561143389ca3d42be3707caaFWS -https://services.arcgis.com/QVENGdaPbd4LUkLV/arcgis/rest/services/USFWS_Wildfire_History_gdb/FeatureServerUSFS - https://apps.fs.usda.gov/arcx/rest/services/EDW/EDW_FireOccurrenceAndPerimeter_01/MapServerAgency Fire GIS ContactsRD&A Data ManagerVACANTSusan McClendonWFM RD&A GIS Specialist208-258-4244send emailJill KuenziUSFS-NIFC208.387.5283send email Joseph KafkaBIA-NIFC208.387.5572send emailCameron TongierUSFWS-NIFC208.387.5712send emailSkip EdelNPS-NIFC303.969.2947send emailJulie OsterkampBLM-NIFC208.258.0083send email Jennifer L. Jenkins Alaska Fire Service 907.356.5587 send email

IntroductionIRWIN ArcGIS Online GeoPlatform Services The Integrated Reporting of Wildland-Fire Information (IRWIN) Production data is replicated every 60 seconds to the ArcGIS Online GeoPlatform organization so that read-only views can be provided for consumers. This replicated view is called the hosted datastore. The “IRWIN Data” group is a set of Feature Layer views based on the replicated IRWIN layers. These feature layers provide a near real-time feed of all valid IRWIN data. All incidents that have been shared through the integration service since May 20, 2014 are available through this service. The incident data provides the location of existing fires, size, conditions and several other attributes that help classify fires. The IRWIN Data service allows users to create a web map, share it with their organization, or pull it into ArcMap or ArcGIS Pro for more in-depth analysis.InstructionsTo allow the emergency management GIS staff to join the IRWIN Data group, they will need to set up an ArcGIS Online account through our account manager. Please send the response to Samantha Gibbes (Samantha.C.Gibbes@saic.com) and Kayloni Ahtong (kayloni_ahtong@ios.doi.gov). Use the below template and fill in each part as best as possible, where the point of contact (POC) is the person responsible for the account.Reply Email Body: The (name of application) application requests the following user account and access to the IRWIN Data group.POC Name: First name Last name and titlePOC Email: Username: <>_irwin (choose a username, something short, followed by _irwin)Business Justification: Once you are set up with the account, I will coordinate a call to go over any questions.

Protecting Forests and Communities from Wildfire Risk (FIGURE 1b-3) The Protecting Forests and Communities from Wildfire Risk map shows areas of North Carolina where wildfire mitigation and preparedness efforts can reduce loss of life and property, and prevent degradation of the forest resource due to intense fires typical of southern forests. These lands rank high for wildfire susceptibility in the Southern Wildfire Risk Assessment System (ArcGIS software). Many of these areas are considered to be within the wildland-urban interface, and many are owned by individuals who may be unfamiliar with the role of fire in southern forests and firewise building principles.

This Operations Dashboard presents detectable thermal activity from the MODIS sensor on-board NASA's Aqua and Terra satellites for the last 48 hours. MODIS Global Fires is a product of NASA’s Earth Observing System Data and Information System (EOSDIS), part of NASA's Earth Science Data. EOSDIS integrates remote sensing and GIS technologies to deliver global MODIS hotspot/fire locations to natural resource managers and other stakeholders around the World. The Satellite (Thermal) Hotspots and Fire Activity layer can be access from the ArcGIS Living Atlas of the World. Many of the fire stats represented here include the Fire Radiative Power intensity attribute, which is a measure of the total energy output of a fire in megawatts. This metric is important for applications of biomass burning, as fires in areas with greater biomass are associated with higher FRP. Each of the elements in the Dashboard help to filter, select, and zoom into the thousands of features on the map. The basemap was customized using the ArcGIS Vector Tile Style Editor app.

This layer presents the best-known point and perimeter locations of wildfire occurrences within the United States over the past 7 days. Points mark a location within the wildfire area and provide current information about that wildfire. Perimeters are the line surrounding land that has been impacted by a wildfire.Consumption Best Practices:

As a service that is subject to very high usage, ensure peak performance and accessibility of your maps and apps by avoiding the use of non-cacheable relative Date/Time field filters. To accommodate filtering events by Date/Time, we suggest using the included "Age" fields that maintain the number of days or hours since a record was created or last modified, compared to the last service update. These queries fully support the ability to cache a response, allowing common query results to be efficiently provided to users in a high demand service environment. When ingesting this service in your applications, avoid using POST requests whenever possible. These requests can compromise performance and scalability during periods of high usage because they too are not cacheable.Source:  Wildfire points are sourced from Integrated Reporting of Wildland-Fire Information (IRWIN) and perimeters from National Interagency Fire Center (NIFC). Current Incidents: This layer provides a near real-time view of the data being shared through the Integrated Reporting of Wildland-Fire Information (IRWIN) service. IRWIN provides data exchange capabilities between participating wildfire systems, including federal, state and local agencies. Data is synchronized across participating organizations to make sure the most current information is available. The display of the points are based on the NWCG Fire Size Classification applied to the daily acres attribute.Current Perimeters: This layer displays fire perimeters posted to the National Incident Feature Service. It is updated from operational data and may not reflect current conditions on the ground. For a better understanding of the workflows involved in mapping and sharing fire perimeter data, see the National Wildfire Coordinating Group Standards for Geospatial Operations.Update Frequency:  Every 15 minutes using the Aggregated Live Feed Methodology based on the following filters:Events modified in the last 7 daysEvents that are not given a Fire Out DateIncident Type Kind: FiresIncident Type Category: Prescribed Fire, Wildfire, and Incident Complex

Area Covered: United StatesWhat can I do with this layer? The data includes basic wildfire information, such as location, size, environmental conditions, and resource summaries. Features can be filtered by incident name, size, or date keeping in mind that not all perimeters are fully attributed.Attribute InformationThis is a list of attributes that benefit from additional explanation. Not all attributes are listed.Incident Type Category: This is a breakdown of events into more specific categories.Wildfire (WF) -A wildland fire originating from an unplanned ignition, such as lightning, volcanos, unauthorized and accidental human caused fires, and prescribed fires that are declared wildfires.Prescribed Fire (RX) - A wildland fire originating from a planned ignition in accordance with applicable laws, policies, and regulations to meet specific objectives.Incident Complex (CX) - An incident complex is two or more individual incidents in the same general proximity that are managed together under one Incident Management Team. This allows resources to be used across the complex rather than on individual incidents uniting operational activities.IrwinID: Unique identifier assigned to each incident record in both point and perimeter layers.

Acres: these typically refer to the number of acres within the current perimeter of a specific, individual incident, including unburned and unburnable islands.Discovery: An estimate of acres burning upon the discovery of the fire.Calculated or GIS:  A measure of acres calculated (i.e., infrared) from a geospatial perimeter of a fire.Daily: A measure of acres reported for a fire.Final: The measure of acres within the final perimeter of a fire. More specifically, the number of acres within the final fire perimeter of a specific, individual incident, including unburned and unburnable islands.

Dates: the various systems contribute date information differently so not all fields will be populated for every fire.FireDiscovery: The date and time a fire was reported as discovered or confirmed to exist. May also be the start date for reporting purposes.

Containment: The date and time a wildfire was declared contained. Control: The date and time a wildfire was declared under control.ICS209Report: The date and time of the latest approved ICS-209 report.Current: The date and time a perimeter is last known to be updated.FireOut: The date and time when a fire is declared out.ModifiedOnAge: (Integer) Computed days since event last modified.DiscoveryAge: (Integer) Computed days since event's fire discovery date.CurrentDateAge: (Integer) Computed days since perimeter last modified.CreateDateAge: (Integer) Computed days since perimeter entry created.

GACC: A code that identifies one of the wildland fire geographic area coordination centers. A geographic area coordination center is a facility that is used for the coordination of agency or jurisdictional resources in support of one or more incidents within a geographic coordination area.Fire Mgmt Complexity: The highest management level utilized to manage a wildland fire event.Incident Management Organization: The incident management organization for the incident, which may be a Type 1, 2, or 3 Incident Management Team (IMT), a Unified Command, a Unified Command with an IMT, National Incident Management Organization (NIMO), etc. This field is null if no team is assigned.Unique Fire Identifier: Unique identifier assigned to each wildland fire. yyyy = calendar year, SSUUUU = Point Of Origin (POO) protecting unit identifier (5 or 6 characters), xxxxxx = local incident identifier (6 to 10 characters)RevisionsJan 4, 2021: Added Integer fields 'Days Since...' to Current_Incidents point layer and Current_Perimeters polygon layer. These fields are computed when the data is updated, reflecting the current number of days since each record was last updated. This will aid in making 'age' related, cache friendly queries.Mar 12, 2021: Added second set of 'Age' fields for Event and Perimeter record creation, reflecting age in Days since service data update.Apr 21, 2021: Current_Perimeters polygon layer is now being populated by NIFC's newest data source. A new field was added, 'IncidentTypeCategory' to better distinguish Incident types for Perimeters and now includes type 'CX' or Complex Fires. Five fields were not transferrable, and as a result 'Comments', 'Label', 'ComplexName', 'ComplexID', and 'IMTName' fields will be Null moving forward.Apr 26, 2021: Updated Incident Layer Symbology to better clarify events, reduce download size and overhead of symbols. Updated Perimeter Layer Symbology to better distingish between Wildfires and Prescribed Fires.May 5, 2021: Slight modification to Arcade logic for Symbology, refining Age comparison to Zero for fires in past 24-hours.Aug 16, 2021: Enabled Time Series capability on Layers (off by default) using 'Fire Discovery Date' for Incidents and 'Creation Date' for Perimeters.This layer is provided for informational purposes and is not monitored 24/7 for accuracy and currency.If you would like to be alerted to potential issues or simply see when this Service will update next, please visit our Live Feed Status Page!

Click on the map for more information. View the Legend below. Click the Layers tab above to turn on and to view additional data layers.More detailed incident specific information can be found on Inciweb by searching for the incident by name.

Summary This feature class documents the fire history on CMR from 1964 - present. This is 1 of 2 feature classes, a polygon and a point. This data has a variety of different origins which leads to differing quality of data. Within the polygon feature class, this contains perimeters that were mapped using a GPS, hand digitized, on-screen digitized, and buffered circles to the estimated acreage. These 2 files should be kept together. Within the point feature class, fires with only a location of latitude/longitude, UTM coordinate, TRS and no estimated acreage were mapped using a point location. GPS started being used in 1992 when the technology became available. Records from FMIS (Fire Management Information System) were reviewed and compared to refuge records. Polygon data in FMIS only occurs from 2012 to current and many acreage estimates did not match. This dataset includes ALL fires no matter the size. This feature class documents the fire history on CMR from 1964 - present. This is 1 of 2 feature classes, a polygon and a point. This data has a variety of different origins which leads to differing quality of data. Within the polygon feature class, this contains perimeters that were mapped using a GPS, hand digitized, on-screen digitized, and buffered circles to the estimated acreage. These 2 files should be kept together. Within the point feature class, fires with only a location of latitude/longitude, UTM coordinate, TRS and no estimated acreage were mapped using a point location. GPS started being used in 1992 when the technology became available. Data origins include: Data origins include: 1) GPS Polygon-data (Best), 2) GPS Lat/Long or UTM, 3)TRS QS, 4)TRS Point, 6)Hand digitized from topo map, 7) Circle buffer, 8)Screen digitized, 9) FMIS Lat/Long. Started compiling fire history of CMR in 2007. This has been a 10 year process.FMIS doesn't include fires polygons that are less than 10 acres. This dataset has been sent to FMIS for FMIS records to be updated with correct information. The spreadsheet contains 10-15 records without spatial information and weren't included in either feature class. Fire information from 1964 - 1980 came from records Larry Eichhorn, BLM, provided to CMR staff. Mike Granger, CMR Fire Management Officer, tracked fires on an 11x17 legal pad and all this information was brought into Excel and ArcGIS. Frequently, other information about the fires were missing which made it difficult to back track and fill in missing data. Time was spent verifiying locations that were occasionally recorded incorrectly (DMS vs DD) and converting TRS into Lat/Long and/or UTM. CMR is divided into 2 different UTM zones, zone 12 and zone 13. This occasionally caused errors in projecting. Naming conventions caused confusion. Fires are frequently names by location and there are several "Soda Creek", "Rock Creek", etc fires. Fire numbers were occasionally missing or incorrect. Fires on BLM were included if they were "Assists". Also, fires on satellite refuges and the district were also included. Acreages from GIS were compared to FMIS acres. Please see documentation in ServCat (URL) to see how these were handled.