Tectonic plates are pieces of Earth's crust and upper mantle called the lithosphere and are about 100 km thick. There are two main types of plates: oceanic and continental, each composed of different materials. The formation and movement of these plates generates everything from the shape and orientation of continents to the mountains and trenches on Earth. The plates layer shows major and minor plates. Microplates are not included in this map. This version of the tectonic plates and boundaries was derived from Peter Bird in Geochemistry Geophysics Geosystems, 4(3), 1027, [doi:10.1029/2001GC000252]. The full publication can be read here. Processing of the 2014 version of the data into GIS formats was done by Hugo Ahlenius.

The Earth’s lithosphere is made up of a series of plates that float on the mantle. Scientists think the convection of the mantle causes these plates to move triggering earthquakes, volcanoes, mountain-building events, or trench formation. These plates creep along at a rate of approximately five to ten centimeters (two to four inches) per year. These plates move in primarily three main ways. They slide past one another along transform (strike-slip) boundaries, they push against each other at convergent boundaries, or pull away in opposite directions at divergent boundaries. Each one of these interactions create different types of landforms. For example, the steady pressure of the Indian Plate and the Eurasian Plate built the Himalaya mountains and the Plateau of Tibet. The divergent boundary between the African Plate and the Arabian formed the Red Sea.Use this plate map layer to explore how the movement of the plates cause earthquakes, volcanoes, or shape Earth’s landscape.

This map layer features both major and minor plates, but excludes microplates. The data is from the scientific study by Peter Bird published in volume 4, issue 3 of Geochemisty, Geophysics, Geosystems and was translated into geospatial formats by Hugo Ahlenius and updated by Dan Pisut.

117 original plate boundaries from Esri Data and Maps (2007) edited to better match 10 years of earthquakes, land forms and bathymetry from Mapping Our World's WSI_Earth image from module 2. Esri Canada's education layer of plate boundaries and the Smithsonian's ascii file from the download section of the 'This Dynamic Planet' site plate boundaries were used to compare the resulting final plate boundaries for significant differences.

This feature service depicts the boundaries of the Earth's tectonic plates and major fault lines and areas.Tectonic plates are large plates of rock that make up the foundation of the Earth's crust and the shape of the continents. The plates comprise the bottom of the crust and the top of the Earth's mantle. The plates are most famously known for being the source of earthquakes.A fault is a fracture or discontinuity in a volume of rock, across which there has been significant displacement as a result of earth movement. Large faults within the Earth's crust result from the movement of tectonic plates.Feature service published and hosted by Esri Canada © 2020.Content Source(s):Plates, United States Geological Survey (USGS)Fault Lines, United States Geological Survey(USGS)Coordinate System: Web Mercator Auxiliary Sphere (WKID 102100)This work is licensed under the Web Services and API Terms of Use.View Summary | View Terms of Use This data is licensed under a Creative Commons Attribution-NonCommercial 2.5 Canada License

Named Landforms of the World version 2 (NLWv2) contains four sub-layers representing geomorphological landforms, provinces, divisions, and their respective cartographic boundaries. The latter supports map making, while the first three represent basic units, such as landforms, which comprise provinces, and provinces comprise divisions. NLW is a substantial update to World Named Landforms in both compilation method and the attributes that describe each landform. For more details, please refer to our paper, Named Landforms of the World: A Geomorphological and Physiographic Compilation, in Annals of the American Association of Geographers. July 2, 2025: We have made Named Landforms of the World v3 (NLWv3) available. Please explore this group containing all of the layers and data. NLWv2 will remain available. Landforms are commonly defined as natural features on the surface of the Earth. The National Geographic Society specifies terrain as the basis for landforms and lists four major types: mountains, hills, plateaus, and plains. Here, however, we define landforms in a richer way that includes properties relating to underlying geologic structure, erosional and depositional character, and tectonic setting and processes. These characteristics were asserted by Dr. Richard E. Murphy in 1968 in his map, titled Landforms of the World. We blended Murphy"s definition for landforms with the work E.M. Bridges, who in his 1990 book, World Geomorphology, provided a globally consistent description of geomorphological divisions, provinces, and sections to give names to the landform regions of the world. AttributeDescriptionBridges Full NameFull name from E.M. Bridges" 1990 "World Geomorphology" Division and if present province and section - intended for labeling print maps of small extents. Bridges DivisionGeomorphological Division as described in E.M. Bridges" 1990 "World Geomorphology" - All Landforms have a division assigned, i.e., no nulls. Bridges ProvinceGeomorphological Province as described in E.M. Bridges" 1990 "World Geomorphology" - Not all divisions are subdivided into provinces. Bridges SectionGeomorphological Section as described in E.M. Bridges" 1990 "World Geomorphology" - Not all provinces are subdivided into sections.StructureLandform Structure as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Coded Value Domain. Values include: - Alpine Systems: Area of mountains formed by orogenic (collisions of tectonic plates) processes in the past 350 to 500 million years. - Caledonian/Hercynian Shield Remnants: Area of mountains formed by orogenic (collisions of tectonic plates) processes 350 to 500 million years ago. - Gondwana or Laurasian Shields: Area underlaid by mostly crystalline rock formations fromed one billion or more years ago and unbroken by tectonic processes. - Rifted Shield Areas: fractures or spreading along or adjacent to tectonic plate edges. - Isolated Volcanic Areas: volcanic activity occurring outside of Alpine Systems and Rifted Shields. - Sedimentary: Areas of deposition occurring within the past 2.5 million years Moist or DryLandform Erosional/Depositional variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Coded Value Domain. Values include: - Moist: where annual aridity index is 1.0 or higher, which implies precipitation is absorbed or lost via runoff. - Dry: where annual aridity index is less than 1.0, which implies more precipitation evaporates before it can be absorbed or lost via runoff. TopographicLandform Topographic type variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Karagulle et. al. 2017 - based on rich morphometric characteristics. Coded Value Domain. Values include: - Plains: Areas with less than 90-meters of relief and slopes under 20%. - Hills: Areas with 90- to 300-meters of local relief. - Mountains: Areas with over 300-meters of relief - High Tablelands: Areas with over 300-meters of relief and 50% of highest elevation areas are of gentle slope. - Depressions or Basins: Areas of land surrounded land of higher elevation. Glaciation TypeLandform Erosional/Depositional variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Values include: - Wisconsin/Wurm Glacial Extent: Areas of most recent glaciation which formed 115,000 years ago and ended 11,000 years ago. - Pre-Wisconsin/Wurm Glacial Extent: Areas subjected only to glaciation prior to 140,000 years ago. ContinentAssigned by Author during data compilation. Bridges Short NameThe name of the smallest of Division, Province, or Section containing this landform feature. Murphy Landform CodeCombination of Richard E. Murphy"s 1968 "Landforms of the World" variables expressed as a 3- or 4- letter notation. Used to label medium scale maps. Area_GeoGeodesic area in km2. Primary PlateName of tectonic plate that either completely underlays this landform feature or underlays the largest portion of the landform"s area.Secondary PlateWhen a landform is underlaid by two or more tectonic plates, this is the plate that underlays the second largest area.3rd PlateWhen a landform is underlaid by three or more tectonic plates, this is the plate that underlays the third largest area.4th PlateWhen a landform is underlaid by four or more tectonic plates, this is the plate that underlays the fourth largest area.5th PlateWhen a landform is underlaid by five tectonic plates, this is the plate that underlays the fifth largest area.NotesContains standard text to convey additional tectonic process characteristics. Tectonic ProcessAssigns values of orogenic, rift zone, or above subducting plate. These data are also available as an ArcGIS Pro Map Package: Named_Landforms_of_the_World_v2.0.mpkx.These data supersede the earlier v1.0: World Named Landforms. Change Log:DateDescription of ChangeJuly 20, 2022Corrected spelling of Guiana from incorrect representation, "Guyana", used by Bridges.July 27, 2022Corrected Structure coded value domain value, changing "Caledonian/Hercynian Shield" to "Caledonian , Hercynian, or Appalachian Remnants". Cite as: Frye, C., Sayre R., Pippi, M., Karagulle, Murphy, A., D. Soller, D.R., Gilbert, M., and Richards, J., 2022. Named Landforms of the World. DOI: 10.13140/RG.2.2.33178.93129. Accessed on:

The global tectonics data compilation is a set of raster and vector data that are useful for investigating tectonics past and present. The datasets are useful on their own or can be used in GIS software, which includes the QGIS project file for convenience. The datasets include our new models for tectonic plate boundaries and deformation zones, geologic provinces and orogens. Additional datasets include earthquake and volcano locations, geochronology, topography, magnetics, gravity, and seismic velocity.

The global tectonics collection is suitable for research and educational purposes.

A web application for use in explaining the global distribution of earthquakes and volcanoes and why they are located where they are - specifically designed for use with NCEA Level 1 Geography.Layers that can be turned on in this application:- Tectonic Plate Boundaries- Recent Earthquakes- Archived Earthquakes- Global VolcanoesStudents can export their maps to a PDF or screenshot their maps.You do not have to have an ArcGIS Schools Bundle to access this web application.

The NLWv3 Tectonic Plates layer contains features are produced based on assigning each NLWv3 landform feature the topmost tectonic plate and then using ArcGIS's Dissolve geoprocessing tool to create multipart polygons representing regions of each of the topmost plates.Tectonic plates are the building blocks of continents and comprise the Earth's crust. Tectonic plates float, moving slowly in the outer layers of the Earth's mantle. Tectonic plates cover the entire Earth's surface and their respective movements creates three types of boundaries: Divergent: The plates are moving away from each other causing new crust to emerge. Such boundaries are usually referred to as rift zones.Convergent: The plates are colliding in one of two ways. The first is when the edges of both plates uplift to cause mountains to rise and the second is subducting where one plate slides beneath the other, causing it to rise. Transform: These plates slide past each other in opposite directions.The boundaries of tectonic plates are where earthquakes, most volcanoes, and rough mountainous terrain are produced. We evaluated the most recently produced digital tectonic plate boundary datasets. The NLWv3 compilation is first based on Ahlenius and then we adjusted many of the boundaries to match more recent seafloor rift and landform boundaries. We also added the Sinai and Adriatic Sea plates. Ahlenius, H. 2014. World tectonic plates and boundaries. Accessed December 22, 2021. https://github.com/fraxen/tectonicplatesTectonic map of the world. Accessed April 5, 2022. https://www.datapages.com/gis-map-publishing-program/gis-open-files/global-framework/tectonic-map-of-the-world-2007.Bird, P. 2003. An updated digital model of plate boundaries. Geochemistry, Geophysics, Geosystems 4 (3):1–46. doi: 10.1029/2001GC000252.Gaba, E. 2018. Tectonic plates boundaries World Map Wt 180degE centered-en.svg. Accessed June 2, 2022. https://en.wikipedia.org/wiki/File:Tectonic_plates_boundaries_World_map_Wt_180degE_centered-en.svgHasterok, D., J. A. Halpin, A. S. Collins, M. Hand, C. Kreemer, M. G. Gard, and S. Glorie. 2022. New maps of global geological provinces and tectonic plates. Earth-Science Reviews 231:104069. doi: 10.1016/j.earscirev.2022.104069.

This map can be used:- to study the motion of the plates- to study phenomena taking place at plate boundaries- to visualize processes taking place.

The Generalized Geology of the World is a highly simplified digital geological data set composed of geographically referenced rock unit patchworks and fault lines which can be combined with tables of descriptive data. These attribute tables contain broadly classified age, main rock type, and name information. This combination of digital data can be used to produce a thematic display. Further information on this dataset can be obtained from http://atlas.geo.cornell.edu

Help students visualise plate boundaries on a spherical Earth, rather than on a flat map. The model shows major plate boundaries, boundary types and highlights our own Indo-Australian plate.Ready to cut out and construct (tennis ball required). Assembly instructions included.Suitable for primary Years 5-6 and secondary Years 7-12

The coverage contains information on contemporary tectonic stress in the crust. To determine the tectonic stress orientation, different types of stress indicators are used in the World Stress Map. They are grouped into four categories:

 -earthquake focal mechanisms (58%)
 -well bore breakouts (27%)
 -in-situ stress measurements (overcoring and hydraulic fracturing,11%)
 -young geologic data (from fault slip analysis and volcanic vent alignments,
 4%)

This report consists of a compilation of twelve digital geologic maps provided in ARC/INFO interchange (e00) format for the state of Oklahoma. The source maps consisted of nine USGS 1:250,000-scale quadrangle maps and three 1:125,000 scale county maps. This publication presents a digital composite of these data intact and without modification across quadrangle boundaries to resolve geologic unit discontinuities. An ESRI ArcView shapefile formatted version and Adobe Acrobat (pdf) plot file of the compiled digital map are also provided.

[Summary provided by the USGS.]

Named Landforms of the World version 2 (NLWv2) contains four sub-layers representing geomorphological landforms, provinces, divisions, and their respective cartographic boundaries. The latter supports map making, while the first three represent basic units, such as landforms, which comprise provinces, and provinces comprise divisions. NLW is a substantial update to World Named Landforms in both compilation method and the attributes that describe each landform. For more details, please refer to our paper, Named Landforms of the World: A Geomorphological and Physiographic Compilation, in Annals of the American Association of Geographers. July 2, 2025: We have made Named Landforms of the World v3 (NLWv3) available. Please explore this group containing all of the layers and data. NLWv2 will remain available. Landforms are commonly defined as natural features on the surface of the Earth. The National Geographic Society specifies terrain as the basis for landforms and lists four major types: mountains, hills, plateaus, and plains. Here, however, we define landforms in a richer way that includes properties relating to underlying geologic structure, erosional and depositional character, and tectonic setting and processes. These characteristics were asserted by Dr. Richard E. Murphy in 1968 in his map, titled Landforms of the World. We blended Murphy"s definition for landforms with the work E.M. Bridges, who in his 1990 book, World Geomorphology, provided a globally consistent description of geomorphological divisions, provinces, and sections to give names to the landform regions of the world. AttributeDescriptionBridges Full NameFull name from E.M. Bridges" 1990 "World Geomorphology" Division and if present province and section - intended for labeling print maps of small extents. Bridges DivisionGeomorphological Division as described in E.M. Bridges" 1990 "World Geomorphology" - All Landforms have a division assigned, i.e., no nulls. Bridges ProvinceGeomorphological Province as described in E.M. Bridges" 1990 "World Geomorphology" - Not all divisions are subdivided into provinces. Bridges SectionGeomorphological Section as described in E.M. Bridges" 1990 "World Geomorphology" - Not all provinces are subdivided into sections.StructureLandform Structure as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Coded Value Domain. Values include: - Alpine Systems: Area of mountains formed by orogenic (collisions of tectonic plates) processes in the past 350 to 500 million years. - Caledonian/Hercynian Shield Remnants: Area of mountains formed by orogenic (collisions of tectonic plates) processes 350 to 500 million years ago. - Gondwana or Laurasian Shields: Area underlaid by mostly crystalline rock formations fromed one billion or more years ago and unbroken by tectonic processes. - Rifted Shield Areas: fractures or spreading along or adjacent to tectonic plate edges. - Isolated Volcanic Areas: volcanic activity occurring outside of Alpine Systems and Rifted Shields. - Sedimentary: Areas of deposition occurring within the past 2.5 million years Moist or DryLandform Erosional/Depositional variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Coded Value Domain. Values include: - Moist: where annual aridity index is 1.0 or higher, which implies precipitation is absorbed or lost via runoff. - Dry: where annual aridity index is less than 1.0, which implies more precipitation evaporates before it can be absorbed or lost via runoff. TopographicLandform Topographic type variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Karagulle et. al. 2017 - based on rich morphometric characteristics. Coded Value Domain. Values include: - Plains: Areas with less than 90-meters of relief and slopes under 20%. - Hills: Areas with 90- to 300-meters of local relief. - Mountains: Areas with over 300-meters of relief - High Tablelands: Areas with over 300-meters of relief and 50% of highest elevation areas are of gentle slope. - Depressions or Basins: Areas of land surrounded land of higher elevation. Glaciation TypeLandform Erosional/Depositional variable as described in Richard E. Murphy"s 1968 "Landforms of the World" map. Values include: - Wisconsin/Wurm Glacial Extent: Areas of most recent glaciation which formed 115,000 years ago and ended 11,000 years ago. - Pre-Wisconsin/Wurm Glacial Extent: Areas subjected only to glaciation prior to 140,000 years ago. ContinentAssigned by Author during data compilation. Bridges Short NameThe name of the smallest of Division, Province, or Section containing this landform feature. Murphy Landform CodeCombination of Richard E. Murphy"s 1968 "Landforms of the World" variables expressed as a 3- or 4- letter notation. Used to label medium scale maps. Area_GeoGeodesic area in km2. Primary PlateName of tectonic plate that either completely underlays this landform feature or underlays the largest portion of the landform"s area.Secondary PlateWhen a landform is underlaid by two or more tectonic plates, this is the plate that underlays the second largest area.3rd PlateWhen a landform is underlaid by three or more tectonic plates, this is the plate that underlays the third largest area.4th PlateWhen a landform is underlaid by four or more tectonic plates, this is the plate that underlays the fourth largest area.5th PlateWhen a landform is underlaid by five tectonic plates, this is the plate that underlays the fifth largest area.NotesContains standard text to convey additional tectonic process characteristics. Tectonic ProcessAssigns values of orogenic, rift zone, or above subducting plate. These data are also available as an ArcGIS Pro Map Package: Named_Landforms_of_the_World_v2.0.mpkx.These data supersede the earlier v1.0: World Named Landforms. Change Log:DateDescription of ChangeJuly 20, 2022Corrected spelling of Guiana from incorrect representation, "Guyana", used by Bridges.July 27, 2022Corrected Structure coded value domain value, changing "Caledonian/Hercynian Shield" to "Caledonian , Hercynian, or Appalachian Remnants". Cite as: Frye, C., Sayre R., Pippi, M., Karagulle, Murphy, A., D. Soller, D.R., Gilbert, M., and Richards, J., 2022. Named Landforms of the World. DOI: 10.13140/RG.2.2.33178.93129. Accessed on:

The USGS presents an updated model of the Juan de Fuca slab beneath southern British Columbia, Washington, Oregon, and northern California, and use this model to separate earthquakes occurring above and below the slab surface. The model is based on depth contours previously published by Flück and others (1997). Our model attempts to rectify a number of shortcomings in the original model and to update it with new work. The most significant improvements include (1) a gridded slab surface in geo-referenced (ArcGIS) format, (2) continuation of the slab surface to its full northern and southern edges, (3) extension of the slab surface from 50-km depth down to 110-km beneath the Cascade arc volcanoes, and (4) revision of the slab shape based on new seismic-reflection and seismic-refraction studies. We have used this surface to sort earthquakes and present some general observations and interpretations of seismicity patterns revealed by our analysis. In addition, we provide files of earthquakes above and below the slab surface and a 3-D animation or fly-through showing a shaded-relief map with plate boundaries, the slab surface, and hypocenters for use as a visualization tool.

[Summary provided by the USGS.]

ESYS plc and the Department of Geomatic Engineering at University College London (UCL) have been funded by the British National Space Centre (BNSC) to develop a web GIS service to serve geographic data derived from remote sensing datasets. Funding was provided as part of the BNSC International Co-operation Programme 2 (ICP-2).

Particular aims of the project were to:

1. use Open Geospatial Consortium (OGC, recently renamed from the OpenGIS Consortium) technologies for map and data serving;

2. serve datasets for Europe and Africa, particularly Landsat TM and Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) data;

3. provide a website giving access to the served data;

4. provide software scripts, etc., and a document reporting the data processing and software set-up methods developed during the project.

ICEDS was inspired in particular by the Committee on Earth Observing Satellites (CEOS) CEOS Landsat and SRTM Project (CLASP) proposal. An express intention of ICEDS (aim 4 in the list above) was therefore that the solution developed by ESYS and UCL should be redistributable, for example, to other CEOS members. This was taken to mean not only software scripts but also the methods developed by the project team to prepare the data and set up the server. In order to be compatible with aim 4, it was also felt that the use of Open Source, or at least 'free-of-cost' software for the Web GIS serving was an essential component. After an initial survey of the Web GIS packages available at the time , the ICEDS team decided to use the Deegree package, a free software initiative founded by the GIS and Remote Sensing unit of the Department of Geography, University of Bonn , and lat/lon . However the Red Spider web mapping software suite was also provided by IONIC Software - this is a commercial web mapping package but was provided pro bono by IONIC for this project and has been used in parallel to investigate the possibilities and limitations opened up by using a commercial package.

http://iceds.ge.ucl.ac.uk/

Neoproterozoic tectonic geography was dominated by the formation of the supercontinent Rodinia, its break-up and the subsequent amalgamation of Gondwana. The Neoproterozoic was a tumultuous time of Earth history, with large climatic variations, the emergence of complex life and a series of continent-building orogenies of a scale not repeated until the Cenozoic. Here we synthesise available geological and palaeomagnetic data and build the first full-plate, topological model of the Neoproterozoic that maps the evolution of the tectonic plate configurations during this time. Topological models trace evolving plate boundaries and facilitate the evaluation of “plate tectonic rules” such as subduction zone migration through time when building plate models. There is a rich history of subduction zone proxies preserved in the Neoproterozoic geological record, providing good evidence for the existence of continent-margin and intra-oceanic subduction zones through time. These are preserved either as volcanic arc protoliths accreted in continent-continent, or continent-arc collisions, or as the detritus of these volcanic arcs preserved in successor basins. Despite this, we find that the model presented here still predicts less subduction (ca. 90%) than on the modern earth, suggesting that we have produced a conservative model and are likely underestimating the amount of subduction, either due to a simplification of tectonically complex areas, or because of the absence of preservation in the geological record (e.g. ocean-ocean convergence). Furthermore, the reconstruction of plate boundary geometries provides constraints for global-scale earth system parameters, such as the role of volcanism or ridge production on the planet's icehouse climatic excursion during the Cryogenian. Besides modelling plate boundaries, our model presents some notable departures from previous Rodinia models. We omit India and South China from Rodinia completely, due to long-lived subduction preserved on margins of India and conflicting palaeomagnetic data for the Cryogenian, such that these two cratons act as ‘lonely wanderers’ for much of the Neoproterozoic. We also introduce a Tonian-Cryogenian aged rotation of the Congo-São Francisco Craton relative to Rodinia to better fit palaeomagnetic data and account for thick passive margin sediments along its southern margin during the Tonian. The GPlates files of the model are released to the public and it is our expectation that this model can act as a foundation for future model refinements, the testing of alternative models, as well as providing constraints for both geodynamic and palaeoclimate models.

Digital plate model containing:

(a) Euler Poles used in reconstruction

(b) Continental crust polygons used in reconstruction

(c) Convergence plate boundaries

(d) Divergent plate boundaries

(e) Transform plate boundaries

(f) Plate topologies

All files are for use in Gplates 2.0 (www.gplates.org)

Help students visualise plate boundaries on a spherical Earth, rather than on a flat map. The model shows plate boundaries and land masses, and highlights our own Indo-Australian plate. Ready to cut out and construct (basketball required). Assembly instructions included. Suitable for primary Years 5 - 6 and secondary Years 7 - 12.

The World Stress Map (WSM) is the global compilation of information on the present-day stress field in the Earth's crust. The current WSM database release 2016 (Heidbach et al., 2016) has 42,870 data records, but the data are unevenly distributed and clustered.To analyse the wave-length of the crustal stress pattern of the orientation of maximum horizontal stress Shmax, we use so-called smoothed stress maps that show the mean SHmax orientation on regular grids. The mean SHmax orientation is estimated with the Matlab® script stress2grid (Ziegler and Heidbach, 2017) which is based on the statistics of bi-polar data. The script provides two different approaches to calculate the mean SHmax orientation on regular grids.The first is using a constant search radius around the grid point and computes the mean SHmax orientation if sufficient data records are within the given fixed search radius. This can result in mean SHmax orientations with a high standard deviation of the individual mean SHmax orientation and it may hide local perturbations. Thus, the mean SHmax orientation is not necessarily reliable for a local stress field analysis.The second approach is using variable search radii and determines the search radius for which the standard deviation of the mean SHmax orientation is below a user-defined threshold. This approach delivers the mean SHmax orientations with a user-defined degree of reliability. It resolves local stress perturbations and is not available in areas with no data or conflicting information that result in a large standard deviation.The search radius starts with 1000 km and is decreased in 100 km steps down to 100 km. Mean SHmax orientation is taken and plotted here for the largest search radius when the standard deviation of the mean SHmax orientation at the individual grid points is smaller than 25°. For the estimation of the mean Shmax we selected the following data: A-C quality data without PBE flag.Furthermore, only data records located on the same tectonic plate as the grid point is used to calculate the mean SHmax orientation. Minimum number of data records within the search radius is n = 5 and data records within a distance of d ≤ 200 km to the nearest plate boundary are not used. Plate boundaries are taken from the global model PB2002 from Bird (2003).Furthermore, a distance and data quality weight is applied; the distance threshold is set to 10% of the search radius. We provide the resulting smoothed stress data for four global grids (0.2°, 0.5°, 1°, and 2° grid spacing) using two fixed search radii (250 and 500 km) and the approach with variable search radii. Details on the format of the data files with the mean SHmax orientation are provided in the 2018-002_readme file.

Stress maps show the orientation of the current maximum horizontal stress (SHmax) in the earth's crust. Assuming that the vertical stress (SV) is a principal stress, SHmax defines the orientation of the 3D stress tensor; the minimum horizontal stress Shmin is than perpendicular to SHmax. In stress maps SHmax orientations are represented as lines of different lengths. The length of the line is a measure of the quality of data and the symbol shows the stress indicator and the color the stress regime. The stress data are freely available and part of the World Stress Map (WSM) project. For more information about the data and criteria of data analysis and quality mapping are plotted along the WSM website at http://www.world-stress-map.org. The stress map of Great Britain and Ireland 2022 is based on the WSM database release 2016. All data records have been checked and we added a number of new data from earthquake focal mechanisms from the national earthquake catalog and borehole data. The number of data records has increased from n=377 in the WSM 2016 to n=474 in this map. Some locations and assigned quality of WSM 2016 data were corrected due to new information. The digital version of the map is a layered pdf generated with GMT (Wessel et al., 2019) using the topography of Tozer et al. (2019). We also provide on a regular 0.1° grid values of the mean SHmax orientation which have a standard deviation < 25°. The mean SHmax orientation is estimated using the tool stress2grid of Ziegler and Heidbach (2019). For this estimation we used only data records with A-C quality and applied weights according to data quality and distance to the grid points. The stress map is available at the landing page of the GFZ Data Services at http://doi.org/10.5880/WSM.GreatBritainIreland2022 where further information is provided.