Until the 1800s, population growth was incredibly slow on a global level. The global population was estimated to have been around 188 million people in the year 1CE, and did not reach one billion until around 1803. However, since the 1800s, a phenomenon known as the demographic transition has seen population growth skyrocket, reaching eight billion people in 2023, and this is expected to peak at over 10 billion in the 2080s.

The earliest point where scientists can make reasonable estimates for the population of global regions is around 10,000 years before the Common Era (or 12,000 years ago). Estimates suggest that Asia has consistently been the most populated continent, and the least populated continent has generally been Oceania (although it was more heavily populated than areas such as North America in very early years). Population growth was very slow, but an increase can be observed between most of the given time periods. There were, however, dips in population due to pandemics, the most notable of these being the impact of plague in Eurasia in the 14th century, and the impact of European contact with the indigenous populations of the Americas after 1492, where it took almost four centuries for the population of Latin America to return to its pre-1500 level. The world's population first reached one billion people in 1803, which also coincided with a spike in population growth, due to the onset of the demographic transition. This wave of growth first spread across the most industrially developed countries in the 19th century, and the correlation between demographic development and industrial or economic maturity continued until today, with Africa being the final major region to begin its transition in the late-1900s.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The world's Jewish population has had a complex and tumultuous history over the past millennia, regularly dealing with persecution, pogroms, and even genocide. The legacy of expulsion and persecution of Jews, including bans on land ownership, meant that Jewish communities disproportionately lived in urban areas, working as artisans or traders, and often lived in their own settlements separate to the rest of the urban population. This separation contributed to the impression that events such as pandemics, famines, or economic shocks did not affect Jews as much as other populations, and such factors came to form the basis of the mistrust and stereotypes of wealth (characterized as greed) that have made up anti-Semitic rhetoric for centuries. Development since the Middle Ages The concentration of Jewish populations across the world has shifted across different centuries. In the Middle Ages, the largest Jewish populations were found in Palestine and the wider Levant region, with other sizeable populations in present-day France, Italy, and Spain. Later, however, the Jewish disapora became increasingly concentrated in Eastern Europe after waves of pogroms in the west saw Jewish communities move eastward. Poland in particular was often considered a refuge for Jews from the late-Middle Ages until the 18th century, when it was then partitioned between Austria, Prussia, and Russia, and persecution increased. Push factors such as major pogroms in the Russian Empire in the 19th century and growing oppression in the west during the interwar period then saw many Jews migrate to the United States in search of opportunity.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Laos: Refugee population: The latest value from 1987 is 80 refugees, a decline from 1200 refugees in 1984. In comparison, the world average is 150501 refugees, based on data from 99 countries. Historically, the average for Laos from 1972 to 1987 is 1760 refugees. The minimum value, 70 refugees, was reached in 1975 while the maximum of 10370 refugees was recorded in 1980.

Abstract

Living Standards Measurement Study surveys have been developed by the World Bank to collect the information necessary to measure living standards and evaluate government interventions in the areas of poverty alleviation and social services. The Azerbaijan Survey of Living Conditions (ASLC) applies many of the features of LSMS surveys to provide data for the World Bank Poverty Assessment.

Geographic coverage

National

Analysis unit

• Households
• Individuals
• Community

Kind of data

Sample survey data [ssd]

Sampling procedure

Design

The methodology that was chosen reflects the purpose of the survey. To balance a desire for a large, representative sample with the expense of a detailed survey instrument, a sample size of 2,016 households was selected. Three separate populations were covered: households in Baku, households outside of Baku and households of Displaced Persons. Within each of those populations, the sample was chosen in such a manner that each household had an equal probability of being selected. At the same time, the logistics of locating the households and conducting the interviews within a specific time frame required that the households be grouped into "work loads" of 12 households each. The size of the workload was determined by the number of interviews that could be carried out in one day by one team of three interviewers and a supervisor.

The Azerbaijan Survey of Living Conditions sample design included 408 households in the eleven raions that make up the city of Baku, 1200 households in the population outside of Baku, and 408 households among the registered Internally Displaced Persons residing throughout the country. This results in an oversampling of the Internally Displaced Persons population and an undersampling of the urban population of Baku. In order to use all data to provide nationally representative estimates, weighting factors must be applied to the data to account for the difference between the population and sample distributions.

Outside of Baku

The most recent data on population came from the 1989 census, the most recent data on number of households was reported in 1994 by the National Statistical Committee. The country is divided into towns, villages of the town type, and villages. Every household is located in one of those three types of population points. A list prepared by the National Statistical Committee contains just over 4,250 of these population points. To choose the sample outside of Baku, Baku was excluded from this list as were all the population points located in raions of the country currently occupied (Agdam, Xankendi, Xodjali, Xodjvendi, Susha, Kubatli, Zangelan, Kelbadjar, Lachin, Fizuli and Djebrali). The remainder of the country included 3453 population points. Information on the number of households was not available for all population points, specifically, "villages of the town type" and cities did not have this information. Average household size was calculated for those points that had both population and the number of households and this number was used to impute the number of households for those population points where it was missing. Average household size was 4.25 which is smaller than expected but reflects the fact that numerator is a 1989 statistic and the denominator is from 1994. First stage of sampling: Using the list of actual and estimated number of households for each population point, 100 workloads were spread across the population points in the following manner: 1. the sampling interval, i, was calculated to be the total number of households outside of Baku divided by 100, 2. the random start, s, was calculated by taking the integer portion of [random number * i + 1], 3. the population point containing the sth household, the (s+i)th household, the (s+2i)th household, etc. were then selected. 4. in the event that more than one interval landed on the same population point, multiple workloads of 12 households were surveyed in that population point. In this manner 100 workloads were distributed in 91 population points. Second stage of sampling: In order to select the households within the selected population points, household lists maintained by the administrative office of each Selsoviet were used. Selsoviets are administrative units that cover from one to ten population points. In the population points covered by a single group of 12 households, 16 dwellings were selected--12 to be interviewed and 4 to be used as replacements if necessary. The sampling interval used was the total number of households on the list divided by 16. Each population point had been assigned a randomly generated number with which to calculate a starting point. In population points with more that one group of 12 households, 16 households were selected for each workload and the sampling interval was number of households divided by 16 multiplied by the number of workloads. It is possible that a second household with separate finances could occupy a dwelling that was only listed once in the Selsoviet’s list. If an interviewer discovered more than one family living in a single dwelling, separate questionnaires were to be filled out for both, and a household randomly selected from among the households not yet interviewed on the list for that population point was taken off the list. This replacement of households, opposed to adding households, was adopted because the schedule did not allow time for more than 12 interviews per workload.

Baku

In February of 1995, SORGU was commissioned to do a random sampling survey in Baku. At that time a list was compiled of 2000 households in Baku. The 2000 households were distributed across the 11 raions of Baku according to each raion’s proportion of the total population. In each raion, the passport office lists were consulted to select the required number of addresses. In each office, the depth of each drawer full of cards was measured, the total length was divided by the number of households to be selected from that raion and cards were then pulled out at those intervals. From each card a specific address in Baku was noted. There is one passport for each dwelling in that raion regardless of the number of separate household/family units occupied the dwelling. The passport lists are, in principle, continuously updated with information from the housing maintenance offices. However, dwellings that are used for business, unoccupied, abandoned or rented to foreigners may remain listed. Furthermore, it is not clear how new privately built housing units would be listed.The 408 households and 92 replacements for this survey were selected by choosing a random number between 1 and 4, starting with that number and then selecting every fifth address from the existing list.

Internally Displaced Population

The National Statistical Committee prepared a listing of population and number of households of internally displaced persons by raion in July 1995. From that list, 34 workloads of 12 households each were selected from 26 raions and 11 Baku Administrative Regions using with a sampling interval and a random start similar to the method used outside of Baku. Ten workloads were selected in Baku and 24 were selected in 17 raions. As before, some raions received more than one workload. In each raion, the administrative offices for the Ministry of Refugees was consulted to locate the internally displaced persons. Each office should have a list of internally displaced persons by households. An additional level of sampling took place to choose three places and four interviews will be conducted in each place. These places were buildings, towns, or tent camps depending on how the households were listed.

Sampling as Implemented

In the course of the field work, it was discovered that population lists are not maintained in major urban areas. In Kuba, Xachmas, Devichi, Qaxi, Sheki, Ali Bairamli, Gojai and Agdash, supervisors had to improvise. In some cases passport registration lists were used, as was done in Baku. In other cases electric users lists, gas office books and butter/meat coupon distribution lists were used in order to capture a sample that was as representative as possible. During field work, one population point, Xandar, was not accessible due to security concerns and its proximity to the occupied region. A second population point, Sofukent, was not accessible because of the weather. In both cases, it was not practicable to replace the population points with two other population points randomly selected from the national list. Instead, field teams were instructed to visit the nearest population point of approximately the same size to the chosen population point. The only major disruption to fieldwork occurred in Naxicevan where interviewers were shot at by terrorists, fortunately none was hurt.

Mode of data collection

Face-to-face [f2f]

Research instrument

DEVELOPMENT OF QUESTIONNAIRES

A questionnaire based on the Living Standards Measurement Study surveys was adapted for use in Azerbaijan. Significant reductions in the number of questions reflected the need to conduct the survey in a short period of time and the more limited scope of a poverty assessment as compared to a full-blown government policy analysis. Questionnaire development was done using the Russian language version. The finalized versions were translated into Azeri by SORGU personnel. A special version of the questionnaire with both Russian and English was prepared for use by data analysts.

DESCRIPTION OF QUESTIONNAIRES

The survey includes questionnaires at both the household and population point (community) levels. Population point is an administrative designation that can be a village, a "village of the town type" or a

The largest Western European city in 1200 was Palermo, with 150 thousand inhabitants. This is a great decrease in the number 150 years previously, where the population was 350 thousand. The city of Cordova also decreased by almost 400 thousand in this time, possibly because of the declining Arabian control and influence in the area. Seville is the third largest city on this list, although it's overall population decreased by ten thousand since 1050. The largest cities are generally in Spain or Italy, although the second largest city on this list is Paris, with 110 thousand inhabitants. In the lists that follow, Paris remains at the top as either the largest (1500 and 1650) or second largest (1330 and 1800) city in Western Europe.

It is estimated that the cities of Cordova (modern-day Córdoba) and Palermo were the largest cities in Europe in 1050, and had between fifteen and twenty times the population of most other entries in this graph, Despite this the cities of Cordova (the capital city of the Umayyad caliphate, who controlled much of the Iberian peninsula from the seventh to eleventh centuries), and Palermo (another Arab-controlled capital in Southern Europe) were still the only cities in Western Europe with a population over one hundred thousand people, closely followed by Seville. It is also noteworthy to point out that the five largest cities on this list were importing trading cities, in modern day Spain or Italy, although the largest cities become more northern and western European in later lists (1200, 1330, 1500, 1650 and 1800). In 1050, todays largest Western European cities, London and Paris, had just twenty-five and twenty thousand inhabitants respectively.

The period of European history (and much of world history) between 500 and 1500 is today known as the 'Dark Ages'. Although the term 'Dark Ages' was originally applied to the lack of literature and arts, it has since been applied to the lack or scarcity of recorded information from this time. Because of these limitations, much information about this time is still being debated today.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Throughout the early modern period, the largest city in Italy was Naples. The middle ages saw many metropolitan areas along the Mediterranean grow to become the largest in Europe, as they developed into meeting ports for merchants travelling between the three continents. Italy, throughout this time, was not a unified country, but rather a collection of smaller states that had many cultural similarities, and political control of these cities regularly shifted over the given period. Across this time, the population of each city generally grew between each century, but a series of plague outbreaks in the 1600s devastated the populations of Italy's metropolitan areas, which can be observed here. Naples At the beginning of the 1500s, the Kingdom of Naples was taken under the control of the Spanish crown, where its capital grew to become the largest city in the newly-expanding Spanish Empire. Prosperity then grew in the 16th and 17th centuries, before the city's international importance declined in the 18th century. There is also a noticeable dip in Naples' population size between 1600 and 1700, due to an outbreak of plague in 1656 that almost halved the population. Today, Naples is just the third largest city in Italy, behind Rome and Milan. Rome Over 2,000 years ago, Rome became the first city in the world to have a population of more than one million people, and in 2021, it was Italy's largest city with a population of 2.8 million; however it did go through a period of great decline in the middle ages. After the Fall of the Western Roman Empire in 476CE, Rome's population dropped rapidly, below 100,000 inhabitants in 500CE. 1,000 years later, Rome was an important city in Europe as it was the seat of the Catholic Church, and it had a powerful banking sector, but its population was just 55,000 people as it did not have the same appeal for merchants or migrants held by the other port cities. A series of reforms by the Papacy in the late-1500s then saw significant improvements to infrastructure, housing, and sanitation, and living standards rose greatly. Over the following centuries, the Papacy consolidated its power in the center of the Italian peninsula, which brought stability to the region, and the city of Rome became a cultural center. Across this period, Rome's population grew almost three times larger, which was the highest level of growth of these cities.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.